MODEL | F11100A | F11125A | F11160A | F11200A | |||
Center height | 100mm | 125mm | 160mm | 200mm | |||
Swivel angle of spindle from horizontal to upward | ≤ 95° | ≤ 95° | ≤ 95° | ≤ 95° | |||
Horizontal position(downward) | ≤ 5° | ≤ 5° | ≤ 5° | ≤ 5° | |||
Rotating angle of spindle for one domplete revolution dividing handle | 9°(540Grad.,1 each) | ||||||
Min.reading of vernier | 10 | 10 | 10 | 10 | |||
Worm gear ratio | 1:40 | 1:40 | 1:40 | 1:40 | |||
Taper of spindle bore | MT3 | MT4 | MT4 | MT4 | |||
Width of locating key | 14mm | 18mm | 18mm | 18mm | |||
Diameter or short taper of spindle for mounting flange | Ø41.275 | Ø53.975 | Ø53.975 | Ø53.975 | |||
Numbers of hole in dividing plate | 1st plate 24.25.28.30.34.37.38.39.41.42.43 2nd plate 46.47.49.51.53.54.57.58.59.62.66 | ||||||
Change gear (Module) | 1.5 | 2 | 2 | 2 | |||
Change gear (Teeth Numbers) | 25.30.35.40.50.55.60.70.80.90.100 | ||||||
Individual indexing error of the spindle for one complete revolution of diving handle | ±45" | ±45" | ±45" | ±45" | |||
Cumulate error at any 1/4 periphery of spindle | ±1 | ±1 | ±1 | ±1 | |||
Max. bearing | 100kg | 130kg | 130kg | 130kg | |||
Net/Gross weight | 67/79kg | 102/112kg | 113/125kg | 130/140kg | |||
Case dimensions | 616×465×265mm | 635×530×530mm | 710×535×342mm | 710×535×342mm |