According to the design specification of clean air conditioning system and the requirements of relevant clean room construction and acceptance standards, the clean combined air conditioning unit will be used in the clean room, which has the design of refrigeration, heating, constant temperature and humidity unit, including primary effect air inlet section, medium effect section and return air port, and can complete the functions of air purification, transportation, dehumidification, humidification, filtration, silencing and heat recovery; According to the difference of purification level and working conditions required by clean rooms, laboratories or electroplating plants, electronic processing and silk screen printing products in different industries, we provide you with appropriate solutions
Frequency conversion: frequency conversion adjustment, using stepless frequency conversion fan, automatic cold and heat balance
Economizer: the design of fresh air valve and return air valve simulates or switches the amount to achieve the best fresh air return ratio
lo frost: The exhaust energy is recovered by the refrigeration system to realize the frost-free operation in winter
Intelligent control: MICROCOMPUTER PLC control technology, automatic fault detection system
Unit type: indoor unit, outdoor unit, split type Integral type, meet the design requirements, flexible installation
The company reserves the right to explain the parameters and shapes of the above devices without prior notice | |||||||||
If you can't see clearly, you can contact customer service to ask for the HD version |
1. Product warranty: Usually, our product warranty is 18 months after leaving factory or 12 months after installation.
2. Delivery time: It takes 2 weeks for air handling unit and fan coil unit, and 4 weeks for the chillers, rooftop packaged unit etc.It will depend on the product quantity. Our products are sold according to order. This is negotiable.
3. Installation: If the project needs our installation guidance, we can send our engineer and translator. The expenses shall be borne by the project owner.
4, Terms of payment:L/C or T/T.This is negotiable.
5, About the sample: if you need, we can give you delivery, you need to pay for this cost.
6,The product introduction on this page is the general products of the company, and the technology and accessories are subject to change without notice, subject to communication