RAP-20 1K Transparent Plastic Primer | ||||||||
Characteristic: | Characteristic: Volatile dry plastic primer, used to enhance adhesion between the paint film and the plastic substrate. | |||||||
Substrates | Plastic substrates such as PP,PA,PVC | |||||||
Substrates Treatment | use the degreaser to clean the substrate | |||||||
Mixing ratio | Do not need to mix with other products, use directly | |||||||
Pot Life | Volatile products, use immediately | |||||||
Spraying viscosity | 11±2S@25℃ | |||||||
No. of Coats | 2 Coats | |||||||
Drying time Time | 10-20 Minutes @20℃ | |||||||
Each Thickness | About 5-10 Micron | |||||||
Spray pressure | Gravity feed 1.2-1.5 Suction feed, 1.2-1.7,Spray pressure 3-4kg/cm² | |||||||
Sandability and Polishabiility | on need to sand | |||||||
Shelf Life | 5 years in original sealed(can continue to use after passing inspection ) | |||||||
Packaging | 1LX12tins/ctn |
Epoxy Primer | ||||||||||||||||||||||||||||||||||||||||||||||||
Characteristic: two pack epoxy primer with strong chemical corrosion resisting ability and adhesion,and also have good leveling and gloss performance | ||||||||||||||||||||||||||||||||||||||||||||||||
Surstrates | Steel,glass steel and hardened original paint surstrates | |||||||||||||||||||||||||||||||||||||||||||||||
Surstrates Treatment | Remove sanded contaminations with degreaser | |||||||||||||||||||||||||||||||||||||||||||||||
Mixing Ratio | Name | Epoxy Primer | Epoxy Primer Hardener | 2K Series Thinner | ||||||||||||||||||||||||||||||||||||||||||||
Volume Ratio | 3Parts | 1 Part | 1Part | |||||||||||||||||||||||||||||||||||||||||||||
Pot Life | 50 Minutes at 25C | |||||||||||||||||||||||||||||||||||||||||||||||
Spray viscosity | 20-22 Seconds at /200C | |||||||||||||||||||||||||||||||||||||||||||||||
No.of Coats | 2-3coats | |||||||||||||||||||||||||||||||||||||||||||||||
Drying Time | 5-10 Minutes at 250C | |||||||||||||||||||||||||||||||||||||||||||||||
Each thickness | 25-30 Micron | |||||||||||||||||||||||||||||||||||||||||||||||
Spray Pressure | Gravity feed:1.2~1.5mm, Suction feed:1.2~1.7mm Spray pressure: 3-4kg | |||||||||||||||||||||||||||||||||||||||||||||||
Drying Time | 3 hours@20℃ 20 minutes@60℃ | |||||||||||||||||||||||||||||||||||||||||||||||
600C | 15 Minutes | 40 Minutes | 40 Minutes | |||||||||||||||||||||||||||||||||||||||||||||
Sand and Polish | Wet sanding with P800-P1000 | |||||||||||||||||||||||||||||||||||||||||||||||
Shelf Life | 3 years | |||||||||||||||||||||||||||||||||||||||||||||||
Packaging | 4KG×4tins/ctn | |||||||||||||||||||||||||||||||||||||||||||||||
The above products are designed for special using, please reference to the label and detailed security parameter , the product users should comply with the health and safe treatment regulations,The above technical data is correct, but we don't provides guarantee, because the final result will be effected by the environment and the use of methods. |