JONA®EPO is the two-component solvent based epoxy finish.
It is used for the steel surfaces of tanks, holds which have the demand of food safety or of an epoxy coating
system.
It is used for concrete floor surfaces of house, laboratory, workshop, places which are frequently walked on.
JONA®EPO has been certified as conforming to the Japanese Industrial Standard JIS K 5659:2008.
Color | Color chart or requirements |
Solid content | min.50 % |
Density | 1.30 ± 0.1 g/ml |
Theoretical coverage | 7 – 9m2/kg/0.04 mm coat. |
Film thickness | WFT: 90µm DFT : 40µm |
Drying time (230C) | Touch dry: 4 hours Hard dry: 16 hours |
Recoating time (230C) | Min. 16 hours |
Mix ratio (By the weight of A/B) | 4/1 |
Pot life (230C) | 7 hours |
Tools:
Airless spray: the fluid tip diameter is from 0.43mm to 0.65mm, min output fluid pressure is 15MPa (150kp/cm2). The angle of spray from 400to 650.
Conventional spray.
For inconsiderable surfaces: brush can be used, care must be taken to achieve the specified dry film thickness.
Clean tools after using.
L.Q JOTON's laboratory conformed to ISO/IEC 17025:2005 , which is one of most prestigious chemical laboratories in Vietnam
Barrel 16 kg (part A) + 4 kg (part B)
Tinned can 3.2 kg (part A) + 0.8 kg (part B)
For small packings as 1 liter Packing and 3.8 liter Packing, we use Carton Box to cover them for stacking them on the pallets neatly.
We have 3 factories for Paint and Relate Coatings in the North and the South of Vietnam, together with many Branches and Agents stretch on all of our country topography.
Please visit our Paints and Related Coatings website at http://joton.com.vn for more information.