Overview
Model No. | DMP50 |
Touch screem | yes |
Chip | ESS9038PRO DACs |
Master Clock Jitter | Below measurable levels |
Digital Sampling Rates (Fs) | 44.1 kHz to 768 kHz, 16bit to 32bit ,DSD64 to DSD512 |
Digital Filter | 32-Bit 8x Oversampling Digital Filter |
Digital/Analog Converters | 2 – 2 channel ESS9038 Pro for working on true balanced output |
Color | Black, grey |
Network protocol | DLNA AIRPLAY, SAMBA and ROON |
Digial audio input | AES/EBU, IIS-E, Optical and Coaxal |
Analog Outputs | Balanced XLR, Non-Balanced RCA |
RS232 | RS232 port x1 |
Communication | Ethernet RJ45 full remote configuration interface |
802.11 a/b/g/n,2.4G/5.8 Dual Band WIFI | |
Hard Disk Drive | Hard Disk Drive bays x1,up to 16T |
Other connectors | USB3.0 x1,TYPE-C x1 |
Power Input | Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz |
AC Power Requirements | 90 Watts |
Case | Black case with silver aluminum faceplate |
Weight | 11KG |
Dimensions | 540*395*195mm |
AUDIO (LPCM) | |
Frequency Range | 2 Hz – 22 kHz (44.1 kHz) |
Amplitude Linearity | 0.1 dB (20 Hz – 20 kHz) |
Phase Linearity | 3 degrees (20 Hz – 20 kHz) |
Dynamic Range | 123 dB (1 kHz) |
Signal-to-Noise Ratio | 123 dB (20-20KHz weighting) |
Channel Separation | -136 dB (1 kHz) |
Total Harmonic Distortion | 0.0004% (1 kHz) |
Audio Output Level | 2.0V RMS (220 Ω output impedance) for Volume at 0.0dB |
3.0V RMS (220 Ω output impedance) for Volume at +8.0dB | |
Balanced XLR Output | +/- 2.0V RMS (440 Ω output impedance) for Volume at 0.0dB |
+/- 3.0V RMS (440 Ω output impedance) for Volume at +8.0dB | |
Color | grey or black available |
NETWORK, USB, SD CARD PLAYBACK | |
Playback Format Supply | .dsf, .dff (DSD64, 128, 256, 512), .aif, .aiff, .alac, .flac, .m4a, .mp4, .wav, .ape, .mp3, .aac, .wma, .ogg, .asf |
Frequency Range | 2 Hz – 125 kHz |
Signal System | 16, 20, 24, & 32 bit PCM and 1 bit DSD |
Sampling Frequency | 44.1 kHz to 384 kHz PCM and 2.822MHz – 22.5792 MHz DSD |
Dynamic Range | 125 dB |
DSD System Clock | Frequency 22.5792 MHz |
Signal-to-Noise Ratio | 123 dB |
Audio Output Level | 2.0V RMS (220 Ω output impedance) for Volume at 0.0dB |
3.0V RMS (220 Ω output impedance) for Volume at +8.0dB | |
Balanced XLR Output | +/- 2.0V RMS (440 Ω output impedance) for Volume at 0.0dB |
+/- 3.0V RMS (440 Ω output impedance) for Volume at +8.0dB | |
SPDIF PLAYBACK | |
Frequency Range | 2 Hz – 100 kHz |
Signal System | 16, 20, and 24 bit |
Sampling Frequency | 44.1 kHz to 192 kHz PCM |
Dynamic Range | 123 dB |
System Clock | Frequency 22.5792 MH |
Signal-to-Noise Ratio | 112 dB |
Audio Output Levelb | 2.0V RMS (220 Ω output impedance) for Volume at 0.0dB |
3.0V RMS (220 Ω output impedance) for Volume at +8.0dB | |
Balanced XLR Output | +/- 2.0V RMS (440 Ω output impedance) for Volume at 0.0dB |
+/- 3.0V RMS (440 Ω output impedance) for Volume at +8.0dB |