Manufacturing Plant, Food & Beverage Factory, Farms, Food Shop, Printing Shops, Construction works , Energy & Mining
Showroom Location:
Egypt, Italy, Viet Nam, Pakistan, Russia
Condition:
New
Application:
Food, Chemical
Packaging Type:
CANS, Barrel, Pails
Packaging Material:
Plastic, Metal
Automatic Grade:
Semi-automatic
Driven Type:
Electric
Voltage:
AC110-230V
Place of Origin:
guangzhou
Brand Name:
Wan Hui
Dimension(L*W*H):
1250L*900w*1300H
Weight:
210 KG
Warranty:
2 years
Key Selling Points:
High-accuracy
Machinery Capacity:
Other
Filling Material:
Milk, Water
Filling Accuracy:
0.05%F.S.
Marketing Type:
New Product 2020
Machinery Test Report:
Provided
Video outgoing-inspection:
Provided
Warranty of core components:
2 years
Core Components:
PLC
Packaging & Delivery
Product Overview
WH-30L-C Automatic weighing and metering filling machine
It is suitable for filling various chemical liquids such as furniture paint, automobile paint, coating and resin, electronic weighing measurement, with automatic induction gland.
FEATURES AT A GLANCE
Compact size
Mobile design
Stainless steel base
Explosion proof configuration
Digital fast input
Right elevation
Left elevation
Front elevation
PRODUCT SPECIFICATIONS
No
Item
Data
1
Use power
110-230V
2
pressure
0.6--0.8Mpa
3
Division value
0.005Kg
4
accuracy
±0.2%
5
filling volume
1--30Kg
6
speed
3-5Barrel/M
7
Drum size
≤φ300*H380mm
8
Overall dimension
1200*900*1300mm
PRODUCT CONFIGURATION
Wan Hui Weighing controller
Zu Li Weighing Module
Delta PLC
SALES AND SERVICE NETWORK
Successful Project
Indonesia project
Singapore Project
Philippine project
SIMILAR PRODUCTS
Certificate display
FAQ
1、 Maintenance:
1. Add lubricating oil (grease) to the middle shaft of the capping machine every month
2. Weighing correction shall be carried out every three months (the correction method is attached)
3. Replace the solenoid valve every 18 months (inside the electric box)
4. Replace the discharge valve cylinder every 24 months (two in a group)
5. Replace the gland cylinder every 36 months
6. Replace the weighing module and gland sensor every 24 months
7. Replace all air tubes every 36 months
8. Replace the drive drum every 24 months
9. Clean the storage hopper and scale platform after each use
10. Replace the electric box button every 24 months (start, feeding, emergency stop)
2、 Common faults and Countermeasures:
fault Treatment countermeasures
The empty barrel cannot be filled automatically 1. Check whether the switch is in automatic gear; (when the switch is in the automatic position, the set filling target weight should be displayed on the lower side of the display. If only the upper line is displayed, check the change-over switch)
2. Whether there is a packing bucket on the weighing platform before startup; (the scale platform shall remain in no-load state before startup)
3. Whether the empty barrel weight is within the set barrel skin range (key 5 is the lower limit and key 6 is the upper limit)
4. If the above processing is invalid, please seek technical support.
Filling weight is more or less 1. Check whether the air inlet pressure is normal;
2. Check whether the parameters of key 8 are set correctly; (parameter 8 shall be set to 2.500-3.000 for normal use);
3. Check whether the discharge valve cylinder is damaged;
4.4 key parameters cannot be set too large, generally between 0.100-0.250;
5. If the above processing is invalid, please seek technical support.
There is a large deviation between the displayed weight of the filling machine and other scales 1. Check whether there are materials or other sundries stuck between the weighing module under the scale platform and the base;
2. In the non filling state, take the same items and weigh them on different scales respectively. Is there any error
3. Correct again according to the correction method;
4. Replace the weighing module;
5. If the above processing is invalid, please seek technical support.
Automatic capping is not possible 1. Check whether the gland sensor is damaged;
2. Check whether the gland solenoid valve is damaged;
3. Check whether the gland cylinder is damaged
4. If the above processing is invalid, please seek technical support.
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier