Product Description
Fusion bonded epoxy powder coating(Model:HEP6004)
Curing Condition |
(180~220)℃/(5~2)min |
||||
Powder Properties |
Item |
Performance Requirements |
Experiment Method |
||
Density(g/cm3) |
1.3~1.5 |
GB/T 4472 |
|||
Moisture Content(%) |
≤0.6 |
GB/T 6554 |
|||
Particle Size(%)
|
D50(μm) Average granularity |
35~50 |
GB/T 6554 |
||
150μm |
≤3.0 |
||||
250μm |
≤0.2 |
||||
Thermal characteristics |
H(J/g) |
≥45 |
Appendix B of GB/T 23257-2017 |
||
Tg2(℃) |
≥98 |
||||
Gel Time(s) |
≥12(200℃) |
GB/T 6554 |
|||
Cure Time(min) |
≤3(200℃) |
Appendix A of GB/T 23257-2017 |
|||
Coating Performance |
Adhesion |
1 |
Appendix C of GB/T 23257-2017 |
||
Cathodic disbonding(mm) |
65℃,48h |
≤5 |
Appendix D of GB/T 23257-2017 |
||
65℃,30d |
≤15 |
||||
(-20±3℃)(2.5°) Bending resistance |
No cracking |
Appendix E of GB/T 23257-2017 |
Application: Used for steel pipe internal/external powder coating,or primer layer of 3LPE/3LPP
1. Product Features
This type of powder coating is a thermosetting pure epoxy powder coating ,it is suitable for three-layer polypropylene(3PP) anti-corrosion layer .
The epoxy powder coating is used as the bottom layer, which has excellent adhesion and cathodic disbonding resistance.
The coating forms a good anti-corrosion system which resist high temperature, various chemicals such as acid, alkali and salts and external damage.
Compared with the anti-corrosion structure of the 3PE,It has a wider temperature range.Currently, it is a major long-lasting anticorrosive material.
2. Precautions
· Storage conditions:It is stored in a dry, ventilated environment below 30 ℃. During this time, it must not be near the heat source.
· After the package is opened for use, the unused portion must be repackaged to prevent moisture absorption from the air.
· Transportation condition:Direct sunlight and rain must be prevented during transportation. When the temperature is above 35℃, it should take insulation measures.
· Conditions of use: Before coating, the surface treatment of steel pipes should meet the requirements of
· GB/T 8923.1. After the surface treatment, the wall of the pipe must be coated within 4 hours.
· Construction safety: Although this product is non-toxic, non-polluting and not easy to burn, measures should be taken to prevent a large amount of inhalation during construction.
Company information
Our company, Inner Mongolia Rational Industry Limited, have been working on plastic resin for five years. Our products vary from general plastic resin to engineering plastics, with one of the most comprehensive product ranges, including PE(HDPE, LDPE, LLDPE), PP, PVC, ABS, PC, PA, POM, PPO, PET, PBT, PS, GPPS, etc. Our products are all famous brands of domestic and abroad markets, such as SINOPEC, CNPC, CNOOC, Shenhua Coal Chemical of China, and some overseas well-known brands like Sabic, NIPC, IRPC, etc. In the first half of this year, we have exported about 1200 tons in total to our overseas customers from North Africa, Europe, South America, central Asia, etc.
Professional plastic knowledge and rich exporting experience will make your purchase easier and more efficient.
Warehouse
Company information
Contact Us