1. Preparing the material; if it's the wood, please make sure the size is not with big different;
2. Open the furnace door, and put the material inside directly; or you can put the material on the rail car to send the material
into the inner pot.
3. Seal the furnace, and check the valves and other things, make sure the furnace is ok before firing.
4. Fire the furnace and to make the charcoal. This step, there is the combustible gas to produce and this gas can be sent to the
bottom of the fire mouth to let the machine heat.
5. After the charcoal finished and cooled, then use the rail car to delivery the charcoal out. Then all the steps are finished.