Environmental Friendly Graffiti Spray Paint for Artist

If you want to know more about Trade Assurance, please click the link below!

https://tradeassurance.alibaba.com/bao/buyer_advertise.htm?spm=a273a.8138841.0.0.6d4dd3feHNEjGg

Advantages

Color Chart

PREPARATION

For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.

APPLICATION

IMPORTANT : Shake the can vigorously for one minute before use. Holding the can 30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat. If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.

CLEAN UP

Clean any over spray with mineral turps or general-purpose thinners. For better long term storage, turn can upside down and spray until no paint is coming out.

CORRECT DISPOSAL

Spray unneeded product on to newspaper dispose to waste. 
Empty can is recyclable.

PRECAUTIONS

 1.Do not use near fire or naked flame.

 2.Do not puncture or incinerate even if empty.

 3.Keep in a cool place out of direct sunlight.

 4.Do not store above 50°C. / 122 F

 5.Never spray at eyes or face.

SAFETY WARNINGS

Keep out of reach of children 
If swallowed seek medical advice immediately.

Warning - intentional misuse by deliberately inhaling contents 
can be harmful or even fatal.

Our products have been introduced and well accepted in about 68 countries and regions. Our export markets cover countries in North and South America, Southeast Asia, the Middle East, South Africa, as well as in Europe.   As international expansion is our main concern, we sincerely invite your esteemed company to promote our AEROPAK brand and CAPTAIN brand in your markets and share the benefits together. Upon interest, please contact us. 

12pcs in a carton, with crosswise card to seperate each can, and protect each can from scratching. 

If shipped by LCL, we will pack all the goods onto pallet, and wrap with plastic film to protect the goods safe in transportation, and make sure you will receive the ordered quantity of goods (will not get loss of the goods) 

For Full container loading, we will ship only by DG cargo container ( UN1950, IMO 2), and will put a net at the back of container to prevent goods drop down and hit workers on the ground. 

Shenzhen I-Like Fine Chemical Co., Ltd, wholly-owned subsidiary of I-like  Industries Group,   has been a leader in manufacturing and marketing of Car Care Products, Spray Paints, Tyre Puncture Repairs, Marking Paints, Spray Adhesives, Air Dusters, etc.  Our products have been exported to more than 68 countries and regions, including US and EU, and our main markets are: EU, South American, South Africa, Australia, Middle East and Asian countries. We have now more than 10 sole agency in the world who are distributing our AEROPAK brand or CAPTAIN brand. 

Covering the area of 20,000 m2, our factory is equipped with advanced facilities for production and development, supported by the top experts of development and production with the degree of Doctors, Masters and Bachelors in China. We adopt advanced manufacturing technique and pass the certificate of ISO9001. So far, in production, we possess well-equipped manufacturing workshop with full and semi-automatic imported production lines, production capability of 150,000pcs/day. A space of 5 full-automatic lines is reserved for the future development. 

I-like offers OEM and ODM service for free with its first-class design team, professional technical advisers, a management team, and high-quality research and development staffs. We bring together the elite group of modern marketing to provide comprehensive?solutions so that help enlarge customers’ business and get good reputation.

Samples
We offer free samples within 2 pieces. Samples should be sent after we receive your courier fee.
Test sample and make a video for our client as it is needed.

Customization
Offer OEM and ODM

Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products, especially in car care products, spray paints, tyre sealer and inflators, air dusters, spray adhesives, etc.

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact. We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free, but as this is aerosol products with pressurized gas, it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels. And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them,
no matter where they come from.