Engineered floor profiling machine

A.Feeding Rolling Table (front) (GTB.1):Positioning separation, multi-sheet after a separation then a subsequent transportation to the next procedure.
B. Longitudinal Double End Tenoner Machine (DTE):A pair of vertical sheet molding, five of the 10 axis preparation. Precision control for the level of bad 0.02-0.05 mm, straightness 0.05 millimeters per meter.
C. Longitudinal Brush Dust Machine (SGP01):In vertical slotted right after brushing the surface of the work piece with ash.
D. Feeding Rolling Table (central) (GTB.2):Vertical processing will be completed sheet into the next process.
E. Automatism Feeding Rack (GT):Right transportation to the plate in the precise location of a single-chip stocks after separation into the next process.
F.Electrical Control System (GT.D): The coordination of the whole production line control.
G. Transverse Double end Tenoner Machine (DTEH):The two ends of a pair of sheet molding. Precision control for the level of bad 0.05 mm, straightness 0.05 millimeters per meter, vertical degrees of 0.05 mm / 100.
H. Feed out belt conveyor:From transverse DET machine feed out boards and then convey.
I. Longitudinal Brush Dust Machine (2) (SGP02):In vertical slotted right after brushing the surface of the work piece with ash.

1.Working width: 100-600 mm
2.Working thickness: 4-20 mm
3.Height of working surface of table: 1100(Mainframe All Height 1100 mm)
4. Rotate speed of cutter shaft: 6000-7000 rpm
5.Feeding speed: 30-80 m/min          
6.Motor Power: DTE06-12D
   Station 1, 2 main spindle motor:    4X8 KW
   Stations 3,4,5,6 milling spindles: 8X5.5 KW
7.Feed-in Motor:               7.5   KW
8.Cutting Tool Diameter: Φ250-Φ280XΦ40
          Cutting tools such as compact sets up a hydraulic motor in need of special note. To ensure 80 meters per minute processing capacity, the      proposed use of hydraulic sets up tight.
9.Dust Absorbing Inlet Diameter
   Stations 1, 2 , 3 , 4 ,5,6: Φ120mmX12
   Transmission chain dust absorbing: Φ100mm
10.Weight:        9000 KG

1.Working length: 600-1800 mm (special configuration working length:400-2500mm)
2.Working Width: 90-600 mm
3. Working thickness: 4-20 mm
4.Height of working surface of table: 950 mm (Mainframe All Height 1100 mm)
5.Rotate speed of cutter shaft: 6000-7000 rpm
6.Feeding Speed: 15-40 m/min
7.Motor Power:
   Station 1, 2 ,3,4,5,6 milling spindles: 12X5.5   KW

   Feed-in motor:          7.5   KW
   Width adjusting motor: 1.1   KW

8.Cutting Tool Diameter:Φ220-Φ250XΦ40
   Cutting tools such as compact sets up a hydraulic motor in need of special note.
9.Dust absorbing inlet diameter:

   Stations 1, 2, 3, 4, 5,6:           Φ120mmX12
   Transmission chain dust absorbing: Φ100mmX2
10.Weight:       9500 KG

●Provide the information in time at customer requirement and make reasonable proposals and budgeting

●Give technical support for the customer's renovation of old facilities for free

●Provide service and support to the customer's other equipments

●On-site planning for the customers by professional engineer

●Valuable advice and recommendations on the purchasing of other auxiliary accessories

●Free training for operators

●For all sold prodcts ,provide one-year free door to door service,lifetime keep-up and maintenance service

●All-around keep-up,transportation and transformation of equipment

●Provide production and technical advisory service