AC230V LED Strip Light Emergercy Power Supply
Model: EP01
Emergency Power Supply is widely used in different kinds of application, using with LED Strip Light is the best solution
for construction site as emergency lighting.
TECHNICAL DATA
Model: |
EP01 |
Input Volt.: |
AC100-277V ~ 50/60Hz |
Output Volt.: |
DC50-180V |
Lamp Power: |
1500W Max. |
Emergency Power: |
50W Max. |
Emergency Time: |
2X60 mins |
Battery Charge: |
24HR(Full charge) |
Input cable: |
1.2M rubber cable 2X1.5mm2 |
Output cable: |
0.5M rubber cable 2X1.5mm2 |
Ta.: |
-10~ 50 oC |
Tc.: |
Max. 60 oC |
IP Grade |
IP65 |
Warranty: |
2 Years |
Product features
- Output voltage will be 175V when emergency function starts working.
- LED brightness will be decreased 70% when emergency function starts working.
- Emergency power is 50W as maximum.
- Starting emergency power is 20W as minimum.
- Emergency time is 60 mins within reasonable power range and reasonable strip length ( 2~50 meters ).
- Power supply will stop working after 60 mins at emergency time, if start electricity again, it will be one more 60 mins.
- When charging battery, indicator light will be green color if power charged more than 90%, less than 90% will be red.
- Press button on/off to check remaining capacity of electricity:
indicator light flashing in
1 time: 0~20% electricity
2 times: 20~40% electricity
3 times: 40~60% electricity
4 times: 60~80% electricity
5 times: above 80% electricity
- Press button on/off in 3 seconds to stop emergency function.