Electrostatic spray exterior no- tgic polyester powder paint colors for gate
More Detail Information, contact with :
Coco chen I Sales Manager
WhatsApp/ Wechat: +86 18551609905 / Skype: colorpowdercoating
Jinhu Color Powder Coating Co.Ltd
Office:+86-25-57909686 I Cellphone: +86-18551609905
Gloss levels range from 50- 90% and above
A wide range colors are available ,certain color is subject to the technical approval .
APPLICATION SCHEDULE
Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.
Curing schedule :10 minutes at 200℃ (metal temperature )
Optimal film thickness : 60 - 80 um
POWDER PROPERTIES
Specific gravity : 1.25 - 1.75 (depend on colors) Particle size distribution(Laser Particle size analyser) :Less than 5% above 100 um 50 – 65% above 32 um : Average particle size : 35- 45um
COATING PROPERTIES The following are typical properties determined on 0.8 mm gauge degreased galvanised steel
Film thickness (ISO 2178) : 60 - 80 µm
Flow out : Good
Gloss (ISO 2813, 60º) : >50 %
Adhesion (ISO 2409) : GT= 0
Pencil hardness(ASTM D3363 ) : H – 2H
Direct and reverse impact (ASTM D2794) : 50kg.cm
Specifications:
1)good physical property
2)indoor & out door
3)anti-weather
4)anti-UV
Main Composion
Mainly made of polyester resin and curing agent, pigment ,filler and other addictives
PRODUCT INFORMATION
Polyester TGIC coatings offer good UV resistance and weatherability. In addition, a wide range of thicknesses are possible. This allows heavy coating on substrates requiring outdoor stability where polyurethanes will not suffice due to their limited thickness range. This coating also provides excellent flexibility and mechanical properties.
APPLICATION
Outdoor furniture, fencing, air conditioners, lawn and garden equipment, mailboxes, construction equipment, and light standards.
CURE CYCLE: 10-20MIN/180-200°C
SPECIFIC GRAVITY: 1.20 To 1.70 g/cm3 (Based on Color/Gloss)
IMPACT RESISTANCE: 100-160 IN-LBS
PENCIL HARDNESS: H to 2H
FILM THICKNESS: 1.5 - 3 mils (Based on Color/Finish)
STORAGE: Store in a cool and dry location. Temperature not to exceed 80 degrees F
pure epoxy powder coating
we are low price and good quality supplier of powder coating:
Products of different gloss are available: high gloss (above 80%), semi gloss (50-80%), flat gloss (20-50%) and no gloss (below 20%). (The gloss can be adjusted according to the customers' demand
1 Mechanical property | ||
Testing items | Standards and methods | Inspecting index |
impact strength | GB/T1732-1993, AS3715 2.8 | 30-50kg/cm |
Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2-5 millimeters |
Adhesion CHECKED TEST | GB/T9286-88,2mm Cross cut, ISO2409 | Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Pencil hardness | GB/T6739-86, Mitsubishi | Pass H-2H |
2 Chemical resistance and weather resistance | ||
Salt spray test | GB/T1771-91,500 hours | The cross section of corrosion less than 2MM |
Hot and damp resistance test | the GB/T17740-79(89),1000 hours | Without air bubbles, loses the light slightly |
Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
uvioresistant | QUV-313,500 hours | Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of | 2 hours | No bubble, not falling, losing light |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier