Technical Data | ||
Supply power: | AC 220V 50-60Hz | |
Power consumption: | motor 200-350W, light 200-400W | |
Safety device: | 16A or 2×10A | |
Intelligent computer control multilevel control system, frequency control drive |
Standard Configuration | ||
Glass: | door leaf and exhibition box are 6/8mm transparent tempered glasses, curved wall is 5+5mm arc safety laminated glass. | |
Drive device: | 220V±10%, 50-60Hz, 0.25-0.35 KW | |
Central control computer: | PLC programmable logic control system. | |
Revolving pattern: | the variable-frequency speed adjustment system starts, revolves, and stops smoothly and safely. | |
Sensor: | infra-red motion sensors | |
Prevent pinching sensor: | located at the upright column at entrance right. | |
Avoid to knock at the door leaf: | installed a sensor in the rubber strip at the bottom of the leaf (optional) | |
Emergency stop button: | installed on the upright column at entrance right | |
Button for the disabled : | use for disabled people pass slowly. | |
Motor lock: | used when door is out of service. | |
6~9 pieces laser ceiling lamp | ||
Combination operation panel: | functional combination operation panel facilitate function setting. |
Functions | ||
1.Induction revolving | 2.constant temperature indoor | |
3.emergency stop | 4.button for disabled to pass slowly | |
5.safety and fire protection | 6.motor lock | |
7. door leaf stop position | 8.speed adjustment |
Optional | ||
1. | Surface treatment: stainless surface(hairline, titanium alloy), fluocarbon coating spraying, baking varnish,sandblasting, polishing | |
2. | Sensor: concealed, surface | |
3. | others |