Electric power construction use high pressure grouting pump machine
Electric power construction use high pressure grouting pump machine
|
Model |
ZFGP-20 |
|
Out Pressure(Pis/bar) |
217/15 |
|
Output(L/min) |
0-20 |
|
Inlet Diameter(mm) |
32 |
|
Out Diameter(mm) |
25 |
|
Conveying Distance(m) |
15 |
|
Drive Unit Tyep |
Single Phase 1.5KW |
|
Weight(kg) |
80 |
|
Dimension(mm) |
110*70*100 |
The grouting pump is suitable for pressure grouting, post grouting and vacuum grouting. This is due to its high versatility and compatibility. Its lightweight and high pressure capabilities make it an operator's choice in tomorrow's grouting challenges.
Q:What is the working depth and working width of HWS200?
A: The working depth is 0-5mm, which also depends on the floor condition. The working width is 300mm.
Q: As the cutters on the drum is 78pcs, is it enough for milling floor?
A: Usually it is enough, most of our customers use 78pcs; If you think it is not enough, we could add to 132pcs.
Q: What is the lifetime of the TCT cutters?
A: To be honest, it is hard to give a data of lifetime. It is because the floor condition varies different.
Q: Why the bearing needs to inject grease within 4 hours?
A: See the above explanation, please. It is very important.
Q: How to maintain the floor scarifier?
A: Grease the bearing within a few hours. This is very important. When it starts work, don't put down the drum suddenly. It is easy to break up.
Q: How about the quality of motor or gasoline engine?
A: The engine is Honda, made in China, but real Honda; the motor is made up of pure coppers, which we use it for many years.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier