Electric reinforced steel bar cutter machine
Feature:
This machine is efficient for cutting off steel bar products on building construction ,such as ordinary carbon steel , cold and hot round steel , screw thread steel ,flat steel,angle steel and square steel . ( need to make knife) its made of high steel knife seat and connecting shaft ,high speed international standard motor and firm reinforcing covering.This machine is small, solid ,lubricant better,little power loss,opration easy,high efficiency, convenient for moving and the knife can be controlled by manual.
Specification Date:
Rebar cutter | |||
Model | GQ40 (with clutch) | GQ50 (with clutch) | GQ60 (with clutch) |
Cutting rebar Dia (Plain Carbon Steel) | Ø6-40mm | Ø6 -50mm | Ø6 -60mm |
Ⅱgrade screw thread rebar Dia: | Ø6-32mm | Ø6 -42mm | Ø6 -50mm |
Flat steel max. diameter: | 70×15mm | 80×18mm | 90x28mm |
Cutting square steel max. spec(Q235A) | 32×32mm | 40×40mm | 50×50mm |
Angle steel max. spec : | 50×50mm | 63x63mm | 73×73mm |
Cutting quantity: | 32t/min | 28t/min | 28t/min |
Motor spec: model: | Y100L-2 3KW | Y112M-2 4KW | Y112M-2 5.5KW |
Voltage / speed | 380V 2800rpm | 380V 2800rpm | 380V 2800rpm |
Dimension: | 1190×450×680(mm) | 1280×480×720mm | 1380×580×820mm |
Net weight: | 360kgs | 560kgs | 890kgs |
Gross weight: | 415kgs | 585kgs | 920kgs |
Packing size: | 1270×490×820mm | 1470×560×1010mm | 1570x700x1110mm |
Electric reinforced steel bar cutter with GQ50 380V 4kw steel bar cutting machine
It can be used efficienly to cut ordinary carbon steel, hot-rolled steel, screw bar, flat bar, square bar and angle steel bar which are widely used in machining and construction project.
Characteristic:
It is small in size, light in weight, reliable in quality and compact structured.
It is well lubricated. This machine is adopted with closed-box structure in which the flying gears lubricate by them. Filling the lubricating oil over the oil lever indicator to make sure the machines are well lubricities. The oil filling once can be used for over 3 months with continuous working.
Less functional loss. The resistance becomes small because of the improvement in lubrication system and the adoption of rolling bearing at the end of gear axis. This machine functional loss is reduced by 1/3 than other machines.
It is convenient to be moved and maintenance.