Our Rotating Christmas Tree Stand is of solid raw material, steady and rust-resistance. The material has passed the load-bearing and anti-freeze test. After sales experience for more than 15 years, we have not received any complaint from customers. With reasonable body and size design, our Rotating Christmas Tree Stand has big bottom diameter and solid claw, it’s not easy to fall if you install it as per our instruction manual.
Normally, our Rotating Christmas Tree Stand is green body with red or silver ring but we also can do OEM for color as customer requirement.
without water tank | Egantwith water tank | |||||
Color | Main body: Green | Main body: Green | ||||
Ring & Claw: Grey/Red | Ring & Claw: Grey/Red | |||||
Diameter(cm) | 44 | 44 | ||||
Diameter(inch) | 17.32 | 17.32 | ||||
Weight(kgs)-appro | 1.4 | 1.9 | ||||
Weight(lb)-appro | 3.08 | 4.18 | ||||
Height(cm) | 17.1 | 17.1 | ||||
Height(Inch) | 6.73 | 6.73 | ||||
Material-USA | Main body-PP new | Main body-PP new | ||||
Ring-ABS | Ring-ABS | |||||
Claw-Steel with zinc coating | Claw-Steel with zinc coating | |||||
---- | ---- | |||||
Material-Euro | Main body-PP | Main body-PP | ||||
Ring-ABS | Ring-ABS | |||||
Claw-Steel with zinc coating | Claw-Steel with zinc coating | |||||
---- | Water tank: PP | |||||
Freezing resistant(celsius) | ---- | ---- | ||||
Installation tem | PP+5; PP-new-20 | PP+5; PP-new-20 | ||||
Storage tem | PP-10; PP-new -35 | PP-10; PP-new -35 | ||||
Freezing resistant(Fahrenheit) | ---- | ---- | ||||
Installation tem | PP41; PP-new-4 | PP41; PP-new-4 | ||||
Storage tem | PP14; PP-new -31 | PP14; PP-new -31 | ||||
Metal parts(Rust proof) | Claw-Steel with zinc coating | Claw-Steel with zinc coating | ||||
Trees up to(m) | 2.8 | 2.8 | ||||
Trees up to(ft) | 8.5 | 8.5 | ||||
Trunk Diameter(cm) | 11 | 11 | ||||
Trunk Diameter(Inch) | 4.33 | 4.33 | ||||
Reservoir-liter | 1.2 | 4.5 |
1. EASY TO SETUP IN 10 SECONDS: Our Christmas Tree Stand is the only tree stand that allows you to set up in 10 seconds! No screws, no pedals, no hassle or no drilling machine! No assembly required!
2. CHRISTMAS TREE STANDS FOR REAL TREE: Simply lock the stainless-steel grips into position, insert the tree trunk into the spiked base and add water. Easy-fill water reservoir can hold up to 4.5 liters.
3. AVAILBILITY: Our Christmas Tree Stand comes in two different Sizes- Egant Christmas Tree Stand CTS11(with water reservoir 1.2L) and Egant Tree Stand CTS12 Stand(with water reservoir 4.5L).
4. STABLE STAND BASE: 44cm/17.3”classic Christmas tree stand, base weight 1.4kgs/3.1lbs WARRENTY: Christmas Tree Smart Stand has 3-year warranty
5. To ensure your tree is fully secured, be sure to fully lock the blades in place.
6. ENVIRONMENTAL FRIENDLY MATERIAL. The main body of Christmas Tree Stand use PP and the rings use ABS which are confirm to RoHS and Reach. Components for fixing tree are made up of galvanized steel which is rust-proof.
7. PATENT DESIGNED AND MANUFACTURED. Manufacturing, purchasing are well protected because we have applied patent. That means we can entrust sales right to customer. So your sells right is protected in the market.
Rotating Tree Stand is specially designed for live tree, available for both indoor and outside area which can withstand temperature -20℃.
Will your Christmas Tree install in 10 seconds?
Our Rotating Christmas Tree Stand makes it possible.
First step: Set Rotating Christmas Tree Stand in the START position.
Second step: Hold the tree with trunk pointing down, lift the tree up and press it down into the stand.
It’s as simple as that, you can finish the installation within 10 seconds!
Etman International ASA is a Norwegian holding group with 4 subsidiaries located in China, Norway Sweden and Finland. Etman Electric(Changzhou) Co., Ltd is the manufacturing site of the group and located in Changzhou, which is approximately 180km west of Shanghai, one of China's most attractive areas for production. We have lots of experienced staffs to produce Rotating Christmas Tree Stand with high quality and low production cost. Our company have REACH and RoHs test report for Rotating Christmas Tree Stand and has more than 200ITS approved items and factory certificates. Our main products includes: Wall Switch & Plug & Socket, Wall Box & Junction Box, Electric Cables, Energy Saving Illumination Products & Accessories, Rotating Christmas Tree Stand.
1.Produce Plastic Articles by Injection Moulding. This process is for the main body of Christmas tree stand.
2. Assemble ring, claw to the body.
3. Testing both material and performance.
4. Carton box.
INSPECTION POINTS:
1 Raw material We test the physical properties(like bending, expansion, impacting. etc), environmental protection(RoHS, REACH, etc), inflaming retarding, etc. We control the material to assure using new PP.
2 Appearance Check
3 Data Measurement, including:
Physical check (such as product dimension / weight, label review, artwork claims) Use/installation check Tip Over Test Stability Test Loading Test Leakage Test
1 Freight cost--make full use of the container space
Rotating Christmas Tree Stand package and quantity:
1.1To load more quantity in the container
4.5 Protect products from damage because of tilting
1.3 The stands without water tank can be packed 12pcs/carton box, while another stand is packed one piece per carton
2 Safety--considering product and package themselves, and end users
2.1 Warning label for sharp point at the bottom
2.2 Protection cover on the claw
We can do ODM and OEM for Rotating Christmas Tree Stand. Package is as per your requirement. You can have your inner or outside package design with your logo. If you need to use your design, we can send you our design for your reference.
How to Order Our Rotating Christmas Tree Stand?
1 Interested in any model Rotating Christmas Tree Stand, please contact with us
2 Specification Confirmation
3 Sample or trail order is available for test
4 Once sample is confirmed, discuss detail of package. (Designed or as per normal design)
Why Choose Us?
Advantages we have:
1 Professional manufacturer with more than 20 years' experience
2 High quality and top-end Rotating Christmas Tree Stand
3 Professional R&D dept and sales team support you with good service
4 Alibaba Golden and Assessed Supplier, approved by TUV, Trade Assurance enterprise
Benefits you get:
1 Stable quality Rotating Christmas Tree Stand with high-end
3 Delivery time: 30-45 working days for mass production
4 Get 100% refund if quality and delivery problem happen
Delivery Terms&Time:
Usually FOB, as per customer requirement, CFR,CIF, EXW, DDU, DDP, Express are acceptable
30-45 working days after deposit, as per product and quantity
Payment:
TT in advance (new customer), LC, etc
Port of Loading:
Shanghai, Ningbo, Shenzhen
MOQ for Rotating Christmas Tree Stand:
Full container