Easy joining and installation fiberglass deck panels
Fiberglass deck panels (also called plank) is a one-piece pultruded profile, 500mm over width and 40mm thick, with a tongue and groove joint along the length of the plank that gives a firm, sealable joint between lengths of profile.
Specification:
Fiberglass deck panels (also called plank) is suitable as a cooling tower floor, for walkways, pedestrian bridge decks and odour control covers or to keep out water penetration in potable and waste water treatment units.
Fiberglass deck panels gives a solid floor with a gritted anti-slip surface. It will span 1.5m at a design load of 5kN/m2 with a deflection limit of L/200 and meets all the requirements of BS 4592-4 Industrial type flooring and stair treads Part 5: Solid plates in metal and glass reinforced plastics (GRP) Specification and BS EN ISO 14122 part 2 - Safety of Machinery Permanent means of access to machinery.
Uniform Load |
|||||
Span mm |
750 |
1000 |
1250 |
1500 |
1750 |
Deflection = L/200 |
3.75 |
5.00 |
6.25 |
7.50 |
8.75 |
Load kg/m2 |
4200 |
1800 |
920 |
510 |
320 |
Concentrated Line Load |
|||||
Span mm |
750 |
1000 |
1250 |
1500 |
1750 |
Deflection = L/200 |
3.75 |
5.00 |
6.25 |
7.50 |
8.75 |
Load kg/m2 |
1000 |
550 |
350 |
250 |
180 |
Note: The above data has been calculated from measurements made of the full section modulus - EN 13706, Annex D. |
One of Application: The courtyard aisle