ET5410 400W 150V 40A Battery Test Single Channel TFT Digital Display Programmable DC Tester Electronic Load

User-friendly Design:
It adopts 2.8-inch TFT LCD screen with rich display contents and supports Chinese and
English display;
The operation process is simple and convenient, and with visual interface display system,
it is easy to get started.
Key lock function to prevent misoperation;

High-performance load:
It provides CC, CV, CR, CP and CC+CV, CR+CV several basic measurement modes;
It provides professional battery test;
It provides professional LED test;
The Tran test mode can test the dynamic output performance of the power supply;
The scan test mode can test the continuity of power output within a certain range;
The list test mode can simulate a variety of loading status changes;
The short circuit test can be used to simulate load short circuit;
Support external trigger input;
Built-in buzzer alarm;
Maintain data storage in case of power failure;
Remote operation via USB, RS-232(optional)or 485 (optional) interfaces;
With PS2 interface, and supports external keyboard for data value setting;

Multiple safety protection:
It provides overcurrent, overvoltage, overpower, over temperature protection. The
overvoltage and overcurrent parameters can be set flexibly, so as to effectively protect the load;
It has intelligent fan speed control function, which can effectively reduce the fan noise
when it is working.
With input polarity reverse prompt;

General technical specifications: Power supply voltage: 220Vac±10%, 110Vac±10%, 45-65Hz Display: 2.8-inch TFT LCD screen with resolution of 480×320 Operating temperature: 0℃ to 40℃ Storage temperature: -10℃ to 70℃ Relative humidity: < 80% Interface: standard USB, RS232 or 485(optional) Size: 90mm×190mm×300mm (width × height × depth)

Standard accessories: Three-core power cord 1 Power fuse 2 User manual 1

Optional accessories: Light disk USB cable 232/485 cable Output wire