Model | ET-360JY |
Input Voltage | 380V(220V,400V,415V, 440V etc) |
Input Frequency | 50Hz/60Hz |
Edge Width | 12-55 mm |
Panel Length | Min.120 mm |
Panel Width | Min.60 mm |
Edge Thickness | 0.4-3 mm |
Panel Thickness | 10-50mm |
Panel Preheating power | 0.3 kW |
Glue Melting Power | 1.5 kw |
Gluing Motor | 0.55 kW |
End-trimming Motor Power | 0.37 kw*2 |
Fine-trimming Motor Power | 0.75 kw*2 |
Polishing Motor | 0.18 kw*2 |
Total Power | 6 kw |
Package Size | 2800*800*1500 mm |
Model | ET-60E | ET-360A | ET-360B | ET-360YC | ET-360YCC | ET-468 | ET-360F | ||||||
Motor power | 5.1KW | 6.5KW | 8KW | 12.5KW | 22KW | 16KW | 15KW | ||||||
Panel width | ≥60mm | ||||||||||||
Panel thickness | 10~60mm | ||||||||||||
Edge band thickness | 0.4~3.0mm | ||||||||||||
Edge band width | 12~65mm | ||||||||||||
Feed speed | 0~13m/min | ||||||||||||
Working pressure | 0.7 Mpa | ||||||||||||
Size(LxWxH)mm | 2740*850*1480 | 3700*930*1600 | 4080*930*1600 | 4900*930*1600 | 5700*930*1600 | 6600*1200*1600 | 5900*930*1600 | ||||||
ET-60E | gluing,trimming,scrapping and buffing,also with manual end cutting | ||||||||||||
ET-360A | gluing,end cutting,fine trimming,scrapping and buffing | ||||||||||||
ET-360B | gluing,end cutting,rough trimming,fine trimming,scrapping and buffing | ||||||||||||
ET-360YC | pre-milling,gluing,end cutting,rough trimming,fine trimming,scrapping and buffing | ||||||||||||
ET-360YCC | pre-milling,gluing,end cutting,rough trimming,fine trimming,scrapping,vertical slot, horizontal slot and buffing | ||||||||||||
ET-468 | pre-milling,gluing,end cutting,rough trimming,fine trimming,scrapping,profiling and buffing |