ESMZX-22 24vdc Customized Rotary Paddle Level Switch,bin level sensors, bin level switch

float level switch

 ESMZX-22 24vdc Customized Rotary Paddle Level Switch,bin level sensors, bin level switch

Introduction:

The rotary vane is connected with the clutch by the transmission shaft. When the material is not in contact with the material, the motor maintains normal operation. When the blade contacts the material to cause resistance, the motor stops rotating, and the mechanism simultaneously outputs a contact signal to measure the height of the material.

Application:

Applicable to solid material (powder, granular, block, gel, etc.) level controller, with good sealing, strong overload capacity, light and easy to install, large output capacity. For different materials, it can be realized by adjusting the tension of the spring and replacing the blades of different types. The parts of the contact material are all stainless steel. The rotary switch is widely used in the chemical, plastic, cement, pharmaceutical, feed, food, and other industries. When the measured medium rises to the blade position, the blade is stopped by the medium to stop rotating, so that the contact signal of the opening or closing is output through the relevant control mechanism structure. When the measured medium falls off the blade, the blade recovers under the action of the spring. The bit continues to rotate to resume the probe working state.

Basic parameters:

Operating power: 4W

Power supply voltage: AC220V; DC24V

Contact capacity: SPDT AC 5A/250V DC10A/24V

Blade speed: 1RPM (rev / min)

Measuring torque: 0.1N.m 0.003 N.m 0.001N.m

Working temperature: -20~80°C

Torque: 1.0kg*cm

Protection level: IP65

Connection method: various standard thread, flange, customizable

Withstand voltage: AC1500V/Minute

Applicable specific gravity: 0.5G/M3

Blade material: sus304

Insulation resistance: ≥100MΩ

Remarks:

The above price is the resistance level switch with shaft length L = 200mm

float switch3