ESMTS200-50 50~200kg Weight scale weighing sensor 50KG small electronic scale strain gauge
Range (kg) |
50 |
||
Comprehensive error (%F.S) |
0.3 |
Rated output temperature drift (%F.S/10°C) |
≤0.15 |
Sensitivity (mv/v) |
1±0.15 |
Zero output (mV/V) |
±0.3 |
Nonlinear (%F.S) |
0.2 |
Input resistance (Ω) |
1000±10 |
Repeatability (%F.S) |
0.1 |
Output resistance (Ω) |
1000±10 |
Lag (%F.S) |
0.2 |
Insulation resistance (MΩ) |
≥2000(100VDC) |
Creep (%F.S/3min) |
0.1 |
Recommended excitation voltage (V) |
5~10 |
Zero drift (%F.S/1min) |
0.1 |
Operating temperature range (°C) |
-10~+50 |
Zero temperature drift (%F.S/10°C) |
0.3 |
Overload capability (%F.S) |
150 |
The internal is a 1000 ohm half-bridge strain gauge, the range is 50KG load cell, half bridge structure.
Dimensions: 25mm*30mm
Inside the sensor is a set of half-bridge strain gauges, which can be used in the following three ways:
One: use a sensor with an external resistor to form a full bridge measurement, the range is the range of one sensor: 50KG
Two: use two sensors to form a full bridge measurement, the range is the sum of the ranges of the two sensors: 50KG*2.
Two: using four sensors to form a full bridge measurement, the range is the sum of the ranges of four sensors: 50KG*4