Parameter | Unit | Min. | Typical | Max. | ||||
Transmitter | ||||||||
TX Central Wavelength | nm | 1480 | 1490 | 1500 | ||||
Spectral Width (-20dB) | nm | 1 | ||||||
Side Mode Suppression Ratio (SMSR) | dB | 30 | ||||||
Mean Launched Power (BOL) | dBm | 7 | 7.5 | 10 | ||||
Mean Launched Power (TX Off) | dBm | -45 | ||||||
Extinction Ratio | dB | 8.2 | ||||||
Optical Return Loss Tolerance | dB | -12 | ||||||
Transmitter and dispersion Penalty | dB | 1 | ||||||
Transmitter Mask(PRBS223-1&2.488G) | Compliant With ITU-T G.984.2 | |||||||
Receiver | ||||||||
Receive Wavelength | nm | 1290 | 1310 | 1330 | ||||
Sensitivity (BOL)(PRBS223-1&1.244G,ER=10,BER<10-4) | dBm | -33 | ||||||
Sensitivity (BOL)(PRBS223-1&1.244G,ER=10,BER<10-10) | dBm | -31 | ||||||
Overload(PRBS223-1&1.244G,ER=10,BER<10-10) | dBm | -12 | ||||||
Receiver Burst Mode Dynamic Range | dB | 15 | ||||||
Damage Threshold for Receiver | dBm | 5 | ||||||
SD Assert Level | dBm | -33 | ||||||
SD De-assert Level | dBm | -45 | ||||||
SD Hysteresis | dB | 0.5 | 6 | |||||
WDM Filter isolation to 1550nm | dB | 38 | ||||||
WDM Filter isolation to 1650nm | dB | 35 | ||||||
Electrical Interface Characteristics | ||||||||
Data Input Swing Differential/TX | mV | 200 | 2000 | |||||
Data Output Swing Differential/RX | mV | 400 | 1600 | |||||
Date Differential Impedance | Ω | 90 | 100 | 110 | ||||
LVTTL Output High | V | 2.4 | Vcc | |||||
LVTTL Output Low | V | 0 | 0.4 | |||||
LVTTL Input High | V | 2.0 | Vcc+0.3 | |||||
LVTTL Input Low | V | 0 | 0.8 | |||||
Timing Characteristics | ||||||||
Guard Time (Tg) | ns | 25.6 | ||||||
Reset Pulse Width (Tr) | ns | 12.8 | ||||||
Reset Delay (Trd) | ns | 12.8 | ||||||
Receiver Preamble Time (Tp) | ns | 140 | ||||||
SD Assert Time (TSDA) | ns | 100 | ||||||
SD De-assert Time (TSDD) | ns | 12.8 | ||||||
RSSI Trigger Delay (Ttd) | ns | 25 | ||||||
RSSI Trigger Pulse Width (Tw) | ns | 500 | ||||||
Internal I2C Delay (Twait) | ns | 500 |