Standard: BS EN 10216-2 P265GH Seamless steel tubes for pressure purposes — Technical delivery conditions – Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10216 P265GH Seamless steel tubes for pressure purposes — Technical delivery conditions
Part2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Boiler tubes for temperatures determined by grades, without determination of pressure level.
Grade | Steel No. | C | Si | Mn | P | S | Cr | Mo |
P195GH | 1.0348 | 0.13 max | 0.35 max | 0.70 max | 0.025 max | 0.020 max | 0.30 max | 0.08 max |
P235GH | 1.0345 | 0.16 max | 0.35 max | 1.20 max | 0.025 max | 0.020 max | 0.30 max | 0.08 max |
P265GH | 1.0425 | 0.20 max | 0.35 max | 1.40 max | 0.025 max | 0.020 max | 0.30 max | 0.08 max |
16Mo3 | 1.5415 | 0.12-0.20 | 0.35 max | 0.40-0.90 | 0.025 max | 0.020 max | 0.30 max | 0.25-0.35 |
13CrMo4-5 | 1.7335 | 0.10-0.17 | 0.35 max | 0.40-0.70 | 0.025 max | 0.020 max | 0.70-1.15 | 0.40-0.60 |
10CrMo9-10 | 1.738 | 0.08-0.14 | 0.50 max | 0.30-0.70 | 0.025 max | 0.020 max | 2.00-2.50 | 0.90-1.10 |
25CrMo4 | 1.7218 | 0.22-0.29 | 0.40 max | 0.60-0.90 | 0.025 max | 0.020 max | 0.90-1.20 | 0.15-0.30 |
X10CrMoVNb9-1 | 1.4903 | 0.08-0.12 | 0.20-0.50 | 0.30-0.60 | 0.020 max | 0.010 max | 8.00-9.50 | 0.85-1.05 |
Grade | Steel No. | Ni | Al | Cu | Nb | Ti | V |
P195GH | 1.0348 | 0.30 max | 0.02 min | 0.30 max | 0.01 max | 0.04 max | 0.02 max |
P235GH | 1.0345 | 0.30 max | 0.02 min | 0.30 max | 0.01 max | 0.04 max | 0.02 max |
P265GH | 1.0425 | 0.30 max | 0.02 min | 0.30 max | 0.01 max | 0.04 max | 0.02 max |
16Mo3 | 1.5415 | 0.30 max | 0.04 max | 0.30 max | / | / | / |
13CrMo4-5 | 1.7335 | 0.30 max | 0.04 max | 0.30 max | / | / | / |
10CrMo9-10 | 1.738 | 0.30 max | 0.04 max | 0.30 max | / | / | / |
25CrMo4 | 1.7218 | 0.30 max | 0.04 max | 0.30 max | / | / | / |
X10CrMoVNb9-1 | 1.4903 | 0.40 max | 0.04 max | 0.30 max | 0.06-0.10 | / | 0.18-0.25 |
Grade | Steel No. | Wall Thickness 16mm max Yield Strength R2 (Mpa) | Wall Thickness 16mm-40mm Yield Strength R2 (Mpa) | Wall Thickness 40mm-60mm Yield Strength R2 (Mpa) | Wall Thickness 60mm-100mm Yield Strength R2 (Mpa) | Tensile Strength Rm (Mpa) | Elongation(%)(L) |
P195GH | 1.0348 | 195 min | / | / | / | 320-440 | 27 min |
P235GH | 1.0345 | 235 min | 225 min | 215 min | / | 360-500 | 25 min |
P265GH | 1.0425 | 265 min | 255 min | 245 min | / | 410-570 | 23 min |
16Mo3 | 1.5415 | 280 min | 270 min | 260 min | / | 450-600 | 22 min |
13CrMo4-5 | 1.7335 | 290 min | 290 min | 280 min | / | 440-590 | 22 min |
25CrMo4 | 1.7218 | 345 min | 345 min | 345 min | / | 540-690 | 18 min |
X10CrMoNb9-1 | 1.4903 | 450 min | 450 min | 450 min | 450 min | 630-830 | 19 min |
Grade | Steel No. | Elongation(%)(T) | Izod Impact (J) at 20°C(L) | Izod Impact (J) at 0°C(L) | Izod Impact (J) at 0°C(L) | Izod Impact (J) at 20°C(T) | Izod Impact (J) at 0°C(T) |
P195GH | 1.0348 | 25 min | / | 40 min | 28 min | / | 27 min |
P235GH | 1.0345 | 23 min | / | 40 min | 28 min | / | 27 min |
P265GH | 1.0425 | 21 min | / | 40 min | 28 min | / | 27 min |
16Mo3 | 1.5415 | 20 min | 40 min | / | / | 27 min | / |
13CrMo4-5 | 1.7335 | 20 min | 40 min | / | / | 27 min | / |
25CrMo4 | 1.7218 | 15 min | 40 min | / | / | 27 min | / |
Standard | BS EN 10216-2 Seamless steel tubes for pressure purposes — Technical delivery conditions – Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 10216 Seamless steel tubes for pressure purposes — Technical delivery conditions | |
Part2: Non-alloy and alloy steel tubes with specified elevated temperature properties | |
Steel Grades | P195GH, P235GH, P265GH, 16Mo3, 13CrMo4-5, 10CrMo9-10, 25CrMo4, X10CrMoVNb9-1 |
O.D | 10.2mm-720mm |
W.T | 1.6mm-100mm |
Packing | According to your request. |
Delievery | By sea container |