EFP to fiber for JVC camera RM-LP25/ RM-LP55/RM-LP57 remote control
EFP to fiber for JVC remote control includes a Camera Optic Adaptor and a Optic Base Station. The system transports 1ch 3G/HD-SDI signal from the camera to the Base Station, 1ch reverse 3G/HD-SDI, Genlock or BB/TC, Remote control for JVC camera(compatible with Remote Control Unit RM-LP25/ RM-LP55/RM-LP57), 10/100M Ethernet,, intercom (Camera end can be connected professional 4-pin or 5-pin XLR headset, OB end can be connected intercom main station), tally(One color or two colors can be selected), Remote camera power supply (14.6V DC up to 100 Watts). The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SMPTE hybrid cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
1. 1 ch forward and 1 ch reverse SDI
2. Handle all Pathological patterns
3. Automatic cable equalization to ensure signal integrity
4. 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M
5. Mic inputs with mute and pre-amps
6. Headphone with volume up or down
7. Remote control (Sony/ Panasonic/JVC/Ikegami/ Datavideo optional)
8. Tally LED+/- wet output or dry Contact Closure optional
9. V-mount or A-mount (Anton/Bauer)battery plate optional
10. Genlock or TC/BB is available
11. Reverse PGM / IFB audio is optional
12. 10/100M Ethernet is optional
13. Remote camera power supply (14.6V DC up to 100 Watts), with insertion detection protection, Lemo SMPTE 304 or Neutrik OpticalCON DUO connector
14. SMPTE hybrid cable 200+m
Specifications:
General index
Work Temp | -25°C to 55°C |
Storage Temp | -40°C to 85°C |
humidity | 0 ~ 95% (non-condensing) |
Camera Optic Adaptor | |
Input power | DC 11~19V |
Power consumption | <12W |
Net weight | 1kg |
Appearance size | 188mm*116mm*45mm (without V-mount / A-mount) |
Optic Base Station | |
Input power | AC90~240V |
Power consumption | <12W |
Net weight | 3kg |
Appearance size | 19” 1U standard rack mount |
Optical:
Wavelength | 1310nm / 1550nm / CWDM |
Output Power | -6~-1dBm |
Rx sensitivity | <-18dBm |
Transmission Distance | Remote power 100W,SMPTE hybrid cable 200+m |
Optical connector | Lemo SMPTE 304 / Neutrik OpticalCON DUO Camera end can be rotated 90 degrees |
SDI input/output:
Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface | BNC 75 Ohm |
Genlock / TC / BB
Number of Channels | 1 |
Input/output impedance | BNC 75Ω (unbalance) |
Input/output voltage | 1.0Vp-p |
Differential Gain | < ±1.5% |
Differential Phase | < ±1% |
SNR | >60dB |
Intercom:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone | Mic inputs with mute and pre-amps |
Headphone | with volume up or down |
Optic Base Station | |
Interface | 3pin XLR Female/Male: Party line audio for Clearcom / Altairaudio / Granitesound’s Intercom main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally:
Camera Optic Adaptor | |
Interface | 4pin or 3pin mini XLR |
Output | Dry Contact Closure or wet LED+/- |
On: short or LED on Off: open or LED off | |
Optic Base Station | |
Interface | DB9(Male) |
Input | Dry Contact Closure or TTL |
On: short to GND or TTL low Off: open or TTL high | |
Remote:
Camera Optic Adaptor | |
Interface | JVC Round 6-pin |
Data | JVC Remote Control data |
Optic Base Station | |
Interface | JVC Round 6-pin |
Data | JVC Remote Control data |
PGM:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Headphone | with volume up or down |
Optic Base Station | |
Interface | 3pin XLR Female: Line level balanced audio input |
Ethernet:
Work mode | Full duplex/half duplex |
Data Rate | 10/100Mbps(AUTO) |
connection terminal | RJ45 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier