E1 to 10M Ethernet interface converter
FE1/10BASE-2 Interface Converter (also as FE1/10BASE-2 Ethernet Bridge) is an Ethernet bridge of high performance, which accomplishes the converting between the 10M Ethernet port and the E1 port. As an extended device of the Ethernet, the FE1/10BASE-2 bridge realizes interconnection of two Ethernet by using the E1 channel provided by existing networks with low cost.
10BASE-2(BNC) interfaces are provided at the end of Ethernet LAN to accomplish various functions including MAC address self-learning, address filtering, address table maintenance and flow control.
It is proposed to use the products of this series in pairs.
Circuit interface (E1): Impedance: 75ohm, physical interface: BNC
Impedance: 120ohm, physical interface: RJ45
interface rate: framing: N*64Kbps,N=0~31;
un-framing: 2.048Mbps.
Coding: HDB3, Jitter tolerance in accordance with G.823 Output jitter<0.05UI
Data interface (10BASE-2): Impedance: 75ohm, physical interface: BNC
Interface rate: 10Mbps
Coding: Manchester
Cable: 75ohm coaxial-cable, UTP5 twisted pair.
Transmission range: circuit interface: BNC: 600m; RJ45: 300m;
Data interface: 300m
Indicator: indicating power, connection states of data and circuit interfaces, operation state, test state and trouble alarm.
Dimensions: stand alone: 140mm (dep) x 210mm (wid) x 40mm (hei)
Rack mount: 19in standard 4.5U cabinet
Power supply: stand alone: 85V~264V AC input, 5V/1A output; -36V~-72V DC input,5V/1A output
rack mount:150V~260V AC input,5V/16A,12V/1A output; -38V~-58V DC input,5V/16A,12V/1A output
Power dissipation: 3W
Operational temperature: 0°C~50°C
Storage temperature: -20°C~80°C
Humidity: 5%~90% (no condensation)