Dust Collector Nut Port Bag Filter Pulse Jet Diaphragm Valve

1. The working pressure of the product is 0.1MPa ~ 0.7MPa, and the medium is air that has been degreased and dewatered.

2. When the working voltage of the solenoid valve is 85% of the rated voltage under the condition of the nominal air supply pressure of the product, the opening response time of the solenoid pulse valve should be less than 0.03s.

3. When the working gas source pressure is 0.1MPa, the pulse valve can be closed.

4. The product should be able to withstand a gas pressure of 0.8MPa.

5. Under the specified environmental conditions, the insulation resistance of the electromagnetic coil to the shell should be greater than 1MΩ.

6. Under the condition that the room temperature is 5 degrees to 35 degrees and the relative humidity does not exceed 85%, the electromagnetic coil can withstand the voltage of 50Hz and 250V to the shell, and there is no breakdown for 1min.

7. The electromagnetic pulse valve should be able to work normally after withstanding vibration at a frequency of 20Hz, a full amplitude of 2mm, and a duration of 30min.

8. Under normal use conditions, the cumulative service life of the diaphragm should be greater than 800,000 times.

9. There is no obvious coating peeling, scratches, burrs and other damage on the valve surface.

10. The large-diameter ultra-low pressure electromagnetic pulse valve for rotary injection blowing is supplied with air pressure less than 0.1Mpa, and the use of compressed air is not affected by the simultaneous use of gas in the pipe network, and the operation is stable and reliable. (0.05 ~ 0.1Mpa)

1. Enquiries will be answered quickly within 24 hours.

2. Custom design according to specific working conditions.

Wind network project design for all systems. Become the best structural design.

3. The lowest price of Alibaba. Welcome to compare prices. If the price is higher, we will

Refund the quoted price twice until you are satisfied.

4. Fast delivery time and one package service, convenient and save time

5. After-sales service, fast response, engineer installation guide. We can arrange professional dust collector units. Reach the device location to resolve the issue.

6. Spare parts related to air pulse dust collector.

7. Easy operation, no future worries at all.

1. Q: Are you a factory or a trading company?

Answer: We have 1 factory. Botou Xintian Equipment Environmental Protection Co., Ltd. is a trading company.

We have an improvement team from design, manufacturing ... to installation, commissioning and personnel training.

2. Q: Where is your factory?

Answer: Our factory is located in Botou City, Cangzhou.

3. Q: How does your factory perform quality control?

A: We test the machine before shipment. Our factory has obtained ISO9001: 2008 certification.

4. Q: How long is the warranty period?

During use, two years warranty and free consultation.

5. Q: How to pay for the product?

Provide letter of credit, wire transfer and Western Union.

Tips: Due to different product specifications, please consult the actual price before shooting, thank you for your understanding. Please contact our customer service when shooting the baby, explain the specific specifications of the product, and wait for the price to be changed before trading.