profile | Round bar | square bar | Equal Angle | T--B ar | joistp | channel | ||||
90° | 45° | 90° | 45° | |||||||
Q35Y-20 | 50 | 50*50 | 140*140*12 | 70*70*10 | 140*140*12 | 70*70*10 | 160*88*6 | 160*63*6.5 |
Type | Q35-20 |
Punching pressure (Ton) | 90 |
MAX.shearing thickness (mm) | 20 |
Plate strength (N/mm²) | ≤450 |
Angle of shearing (degree) | 8° |
shearing size of one stroke (mm) | 120*330 10*480 |
Ram stroke (mm) | 80 |
Number of strokes (cpm) | 12-20 |
Throat depth (mm) | 355 |
punching thickness (mm) | 20 |
MAX. punching diameter (mm) | 30 |
Power of main motor (kw) | 7.5 |
Overall dimensions (L*W*H) (mm) | 1950*900*950 |
Weight machine (kg) | 2800 |
2)Shearing: Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down device for round/square bar,channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability to cut angle at 45°both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds.Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily adjustable hold-down device for accurate plate cutting.Large 15″squaring arm with inlaid scale.Special anti-distorted blade for quality cutting.Lower blade has four usable edges.There is screw allow for gap adjust no shim needed.
3)Notching: Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and three gauging stops for precise positioning.The notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more. The notching station also has an over sized table with material stops. This section of the machine can also be outfitted with the optional vee notcher.
4)Bending: Also bend the plate below 500mm. All the components of Machine are of the highest quality in their safety, function. q35y-20 angle steel shearing and punching machine ironworker