Product Detail:
PD15000-RGB | |||
Color | Red | Green | Blue |
Wavelength | 638nm | 520nm | 445nm |
Power | 4000mW | 4000mW | 7000mW |
Beam Size@Aperture | 4.5*6.5mm | ||
Divergence(full angle) | 1.1mrad | ||
Scanning System | DT40 40Kpps@8° ±30°MAX | ||
Cooling method | TEC+Aluminum heat sink+Aluminum housing+Fan | ||
Power Supply | AC100-120/200-240V,50/60Hz | ||
Power Consumption | 290W | ||
Functions | Auto, Sound, SD-Card, DMX, ILDA, X/Y invert, Safety scan-failed, Interlock, Key switch | ||
Housing Size | 320*260*160mm | ||
Net weight | 11.62kg |
Testing time:
Showing time:
Service time:
1. FB3: ILDA;
2. FB4 Optional:
(1). FB4-standard: SD card + Network port;
(2). FB4-DMX: SD card + Network port + DMX In & out;
(3). FB4-MAX: SD card + Network port + DMX In & out + ILDA In & out
Packing:
These great laser show devices would be packed in the professional Flightcase if you wish
Shipping:
• We will ship the products via air-express,which ensure our customers to test soon;Urgent orders with big quantity are supported by DHL,UPS,FEDEX,EMS,TNT,etc.We will choose the most efficient methods for you.
• Air shipping & sea shipping are acceptable,we provide D2D services when you choose the air shipping, FOB,CNF,CIF prices are available,and we can quote to you according to your preferred port in China.
1. The laser has potential harm to the human body and the eyes, It is forbidden to use the laser to irradiate others, especially in the eyes.
2. The power supply itself has no key switch, and the power panel and the input line are exposed, When the laser connects or removes the circuit, it must operate under the condition of power off, in order to prevent the electric shock.
3 It is necessary to ensure that the temperature of the shell of the laser head is close to that of the suitable operating temperature before the laser can be turned on, so as to avoid the excessive temperature difference, which may affect the performance of the laser or damage the device.
4. The product shall be used in a dry, clean and non-static environment with a working temperature of 15 - 50 ℃ to avoid high temperature, high humidity, and violent vibration and impact.
5. Do not arbitrarily adjust the potentiometer on the power supply board to avoid the excessive current, circuit board or laser burn.
6. Please do a good job of external heat dissipation measures, as far as possible to maintain the shell heat cooling air path and module cooling air path consistent, lest the temperature is too high, affect or damage the laser.
7. This product power supply for DC-12V does not connect to other power sources, lest damage the laser.