Drainage Geomat/Erosion control mat EM4
3D Drainage Geomat ( three dimensional erosion control mat) Description:
Introduction: It is a kind of new 3D Drainage Geomat structural geosynthetics , which is applied in water and soil conservation
Features: Preventing soil erosion, increasing the greening area and improving the ecological environment
Specification of the Three-Dimension Erosion Geomat:
Item Spec |
EM2 |
EM3 |
EM4 |
EM5 |
Weight per sq.m. ≥(g/sq.m) |
220 |
260 |
350 |
430 |
Thickness ≥(mm) |
10 |
12 |
14 |
16 |
Width≥(m) |
2 |
|||
Length ≥(m) |
30 |
|||
Vertical tensile strength ≥(KN/m) |
0.8 |
1.4 |
2.0 |
3.2 |
Horizontal tensile strength ≥(KN/m) |
0.8 |
1.4 |
2.0 |
3.2 |
Remark |
The special spec or size can be manufactured according to the demands of the contract. |
Function:
1.Before the greensward grows, it prevents the surface
of the land from the erosion of the wind and rain.
2 .Form compound protection layer with the plant ,
standing the wash-out of the high water level and large speed current.
3.Replace the concrete, asphalt, and block, using in the slope surface protection of roadway, railway, river-way, dyke, and the hillside, etc.
Installation:
Shaping and compacting the sub soil to the required profile.
1, Unrolling the 3D Geo-mat down the slope and fixing it in position with 150---300mm u-pegs.U-Pegs should be spaced between 300mm and 700mm depending on the substrate to ensure that the 3D Geo-mat makes contact with the surface.Overlaps should be pegged at 100mm centres in dry applications and 300mm in wet applications….
2, Anchoring the top of the embankment in spade-deep trenches and ,Where necessary,anchoring the edges to prevent the 3D Geo-mat slipping on the slope and uplift…
3, Longitudinal edges should be overlapped 50mm and transverse edges overlapped 150mm…
4, After seeding the subsurface at a rate of 20-30.
For more detail,pls contact email jane at hdpetmc.com