THE TEETH ROLLE RCRUSHER'S OUT PUT SIZE IS BIGGER THEN SMOOTH ROLLER CRUSHER. YOU CAN CHOOSE AS YOUR OUT PUT SIZE REQUESTS.
1.Drived by electromotor via reducer, two toothroller rotate inward synchronously in opposite direction;
2.Material dropping from the inlet to crushing chamber;
3.Classified by the tooth roller with tooth;
4.The massive materials would be crushed,cut, and then discharged in the discharging opening.
2PG double roller crusher is developed on the basis of traditional roller crusher and combined with the design concept of machine, electricity and oil integrated. It improved the crushing efficiency a lot and reduced the operation cost.
The roll crusher applies to the cement, chemical, electric power, mining, metallurgy, building materials, refractory materials, coal and other industries of thick, brittle block material intermediate crushing, it into the grain-size, discharging granularity is adjustable, can fight pressure strength of 160 mpa or less materials are broken. Especially in the coal industry, the use of native raw coal fragmentation, as long as after iron, removing impurity, without gangue removal, can be directly to broken, broken out of material, granularity and the crushing rate is low, thus simplifies the coal preparation process, reduce the investment and production cost.
Technical parameter
model | Feed size mm | capacity t/h | out put size mm | motor pwoer kw | weight kg |
2PG400*250 | less 350mm | 20-30 | 15-125 | 11 | 2800 |
2PG500*400 | less 350mm | 30-50 | 15-125 | 22 | 600 |
2PG6450*500 | less 400mm | 30-60 | 15-125 | 25 | 4500 |