CHM-T530P4 parameters
Parameters |
|
Model |
CHM-T530P4 |
XYZ Axis travel |
760mm(X)×650mm(Y)×20mm(Z) |
PCB max size |
450mm(L)×330mm(W) |
Support components |
0402-5050, SOP, QFN,BGA etc. |
Mounting speed |
· Without vision:8000cph · With Vision:5500cph |
Precision |
±0.015mm |
Placement head |
4 heads |
Feeding system |
Support max 30pcs 8mm Pneumatic feeder (other options: 12,16,24mm,vibration feeder) · 11pcs general IC stack · Support IC tray |
Vision detection |
Double camera (up & down) |
Motor control |
· XY Axis stepper motor with encoder closed-loop control · Flexible S deceleration · Z Axis reset detection |
Components leakage detection |
Vacuum and visual detection |
Main board |
High-reliability industry motherboard |
Touch Screen |
7 inches industry screen |
Operation system |
Embedded Linux system |
External air source |
0.5MPa |
Power supply |
AC220V 50Hz / AC110V 60Hz |
Dimension |
1050mm(L)×780mm(W)×500mm(H) |
Power |
250W |
Net weight |
110Kg |
Machine description:
CHM-T530P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!
The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. CHM-T530P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.
Vision System Ensure Accuracy
Auto correction offset
The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy.
30pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T530P4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot. It can also work with Yamaha vibration feeder.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Z Axis Detection
Z axis detection function can self-checking the height and angle during placement.
Make sure machine work perfectly with different kinds of components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Mark point auto calibration
more accurate with vision system
After PCB has been put on machine, the machine will use the camera to automatically find the mark point, calibrate the PCB and avoid deviation.
Front IC Bulk Material Area
11pcs front bulk IC stack, suitable for some bulk ICs. more convenient.
IC Tray Supported
software allow 20 user-defined IC tray
User can add one or more IC tray in software, you just need to positioning the first component and the last component, then machine can auto continuous picking.
Package Weight: 146.0kg
Package Size: 117cm x 88cm x 80cm
Packing: wooden case (safe packing)
This SMT machine will be tested well before ship out.
Tools and manuals are complete included in the package.
Each machine 100% test well before ship out.
The complete machine has a warranty period of 1 year from the time of purchase and lifelong service.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
ExhibitionsFactory Condition
Certifications & Patents
Tech support:
Hanan Mob: 0086 18100733752
Skype: charmhigh,hannaIf you want to see more information and videos, please contact us by E- mail.
We will response you at the first time.