roofing sheet double layer roll forming machine | double layer metal roof roll forming machine | metal roof machine | trapezoidal sheet roll forming machine | roofing sheet making machine | wall sheet roll forming machine
Double Layer Roll Forming Machine, available for two profiles (wall and roof panels, etc...) shared one frame, save the cost & space. The two profiles should be double check before making together.
1.This double roll forming machine can produce two different profiles with one machine. Via shared same base frame, un-coiler, PLC control system can much save of your cost.
2.More reasonable forming process design and higher speed; Less roller steps with competitive price.
3.The whole line consists of un-coiler, feeding section, double pre-shearing device, roll forming machine with protect guard, post-cut device, PLC control system, and so on.
Type |
Roll former for roofing |
Shearing Thickness |
Up to Max. 0.8mm |
Thickness |
0.4mm-0.6mm,0.7mm-0.8mm |
Frame Design |
Wall-plate-frame-design /New-stand-frame-design |
Roll Stages |
21/22 stages |
Material Of Forming Roller |
45# steel, CNC lathes, Hard Chrome Coated |
Shafts Diameter | Φ75/Φ95mm |
Main Motor Power |
11KW |
Max. Line Speed of Roll Former |
10-25m/min (Higher speed is available, depends on the specification required by the buyer) |
Hydraulic Group Power |
5.5KW |
Material of Cutting Blade |
Cr12MOV, hear treatment |
Cutting Tolerance |
± 1mm |
Electric Standard |
380V /50Hz/3PH or as per customer's requirements |
Machine Dimensions |
11200mm×1750mm×1650mm |
Major Color of Machine Painted |
RAL 5015 (Blue) or as per customer's requirements |
Machine pictures for reference: