Diy crystal drop gum than heart pendant table mold high mirror gypsum incense car furnishing accessories diffuser stone

The production steps are as follows:

Main materials: mould,ab glue, measuring cup.

Tools needed: disposable gloves, toning cups, toothpicks, color concentrate, electronic scales, etc.

Production procedures:

Step 1:

Prepare the required raw materials: ab glue, mould, disposable gloves, mixing rods, measuring cups (all available in this shop).

Step 2:

Get ready for color concentrate.

Step 3:

Pour AB glue into 3:1 mixture and pour into the measuring cup, stirring slowly until clear.

Step 4:

After stirring, place for about 5 minutes to defoaming before use.

Step 5:

method 1:Pour the AB glue into the mold and drip the color into the measuring cup.

Step 6:

Follow method 1: also can use toothpick to draw some simple patterns, Touch a small drop of color with a toothpick.

Step 7:

Method 2: if you want to place flowers in the finished product, first pick the flowers and dry them with desiccant for a day or two. Put the dried flowers into the mould.

Step 8:

Stay at room temperature for 24 hours or so (slightly longer when the temperature is low).