Dirt separator from air conditioning water system
The life and the efficiency of a heating or cooling or water circling system is greatly dependant on clean water. Dirt can cause many problems such as increased component wear and frequent break downs. Corrosion, pump wear and reduced efficiency result in increased maintenance, unnecessarily high costs and dissatisfied customers.
There is a solution
SYSCA Dirt separator
Remove impurities -- Reduce the energy waste,prevent system failure
Minimal pressure loss – Not interfere with the flow of fluid
Without downtime – Fast dirt removal while system is operating
The inner patented honeycomb mesh in the Air Separator makes the difference
The core exposes the differences
The unique construction of this unit is similar to the well known microbubble deaerators. The special design of the honeycomb net is at the heart of the unique action of the Stainless steel dirt remover. It creates a very still area of water which allows dirt particles of all sizes to sink to the bottom of the unit and collect in the dirt chamber. As the dirt is collected outside the main flow the Stainless steel dirt remover pressure drop remains constant and blockages can not occur. The dirt can be flushed out while the system is in full operation through the drain valve. The large collector ensures that flushing is only required now and then.
AVAILABLE CONNECTIONS AND SIZES
| Size | Connection | Material | Max Temp. & Pres. |
| 3/4" | BSP thread/NPT thread | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| 22mm | compression | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| 1" | BSP thread/NPT thread | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| 1 1/4" | BSP thread/NPT thread | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| 1 1/2" | BSP thread/NPT thread | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| Size | Connection | Material | Max Temp. & Pres. |
| 3/4" R | BSP thread/NPT thread | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| 1" R | BSP thread/NPT thread | Brass | 110℃,1.0Mpa (230°F,145PSI) |
| Size | Connection | Material | Max Temp. & Pres. |
| 2" | BSP thread/welding | Stainless steel | 110℃,1.0Mpa (230°F,145PSI) |
Standard type(1.5m/s)
| Size | Connection | Material | Max Temp. & Pres. | Max flow(m³/h) |
| 50mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 12.5 |
| 65mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 20 |
| 80mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 27 |
| 100mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 47 |
| 125mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 72 |
| 150mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 108 |
| 200mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 180 |
| 250mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 288 |
| 300mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 405 |
Hi-flow type(3m/s)
| Size | Connection | Material | Max Temp. & Pres. | Max flow(m³/h) |
| 50mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 25 |
| 65mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 40 |
| 80mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 55 |
| 100mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 95 |
| 125mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 145 |
| 150mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 220 |
| 200mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 360 |
| 250mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 575 |
| 300mm | Flanged | Steel | 110℃,1.0Mpa (230°F,145PSI) | 810 |
Packed in wooden case with pallet for exporting shipment.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier