Digital Hour Meter And Counter Relay Pulse Rs485 Length 8 Digits Counter
Digital Hour Meter And Counter Relay Pulse Rs485 Length 8 Digits Counter
| Model | Panel Size(mm) | Output Mode | Output | Display | Batch output | Communication | Code |
| CI80-RC60 | 80H×160W | Relay output | 2 loops | 6 digits | 1 loop relay | No | B0380CI01 |
| CI80-RC68 | 80H×160W | RS485 | B0510CI01 | ||||
| CI8-RC60 | 48H×96W | No | B0380CI01 | ||||
| CI8-RC68 | 48H×96W | RS485 | B0510CI01 | ||||
| CI7-RC60 | 72H×72W | No | B0380CI01 | ||||
| CI7-RC68 | 72H×72W | RS485 | B0510CI01 | ||||
| CI4-RC60 | 48H×48W | No | No | B0380CI01 | |||
| CI4-RC68 | 48H×48W | RS485 | B0510CI01 | ||||
| CI8-RC80 | 48H×96W | 8 digits | 1 loop relay | No | B0510CI01 | ||
| CI8-RC88 | 48H×96W | RS485 | B0620CI01 | ||||
| CI7-RC80 | 72H×72W | No | B0510CI01 | ||||
| CI7-RC88 | 72H×72W | RS485 | B0620CI01 | ||||
| CI80-RC60W | 80H×160W | Relay output | 2 loops | 6 digits | 1 loop relay | No | B0425CI01 |
| CI80-RC68W | 80H×160W | RS485 | B0550CI01 | ||||
| CI8-RC60W | 48H×96W | No | B0425CI01 | ||||
| CI8-RC68W | 48H×96W | RS485 | B0550CI01 | ||||
| CI7-RC60W | 72H×72W | No | B0425CI01 | ||||
| CI7-RC68W | 72H×72W | RS485 | B0550CI01 | ||||
| CI4-RC60W | 48H×48W | No | No | B0425CI01 | |||
| CI4-RC68W | 48H×48W | RS485 | B0550CI01 |
| Display | Display digits | Dual-line,6 digits,high light LED |
| Display Range | -19999~999999 | |
| Input Signal | Signal Type | Square wave, sine wave, passive contact |
| Input Impedance | Voltage input impedance is 5.4KΩ, Non-voltage input: short circuit impedance is max.1KΩ | |
| Signal Level | High Level:5-30VDC Low Level:0-2VDC | |
| Input Signal | Max Frequency | 1Hz,30Hz,1KHz,5KHz,10KHz selectable |
| Edge Trigger | NPN falling edge,PNP rising edge | |
| Counting Accuracy | ±1 pulse (more or less) | |
| Ratio Coefficient | 0.00001~9.99999 | |
| Relay | Load Capacity | >100,000 times (NO:250VAC 3A resistive load NC:250VAC 2A resistive load) |
| NO/NC guide | Refer to the connections | |
| Mechanical Life | >10,000,000 times | |
| Input mode | UP/DOWN counting | U UP counting/D DOWN counting |
| UP/DOWN counting control | UD-A UP/DOWN-A,UD-B UP/DOWN-B | |
| Phase Difference Counting | Rotary Encoder Input | |
| Output | Output Mode | 12 kinds, F,N,C,R, etc. |
| Delay Time | 0.01~499.99s | |
| Auxiliary power supply | Supply Voltage | 12VDC±10% |
| Capacity | <100mA | |
| Temp. | Woking Temp. | -10~50 (Unfrozen) |
| Storage Temp. | -25~65 (Unfrozen) | |
| Environment RH | 35-85%RH | |
| Communication | Comm. Protocol | ModBUS RTU |
| Baud Rate | 4.8KBPS 9.6KBPS | |
| Address Range | 1-247 | |
| Comm. Delay | No | |
| Function | Power-Fail Memory | YES/NO |
| Reset Pause Lock | Optional | |
| Power supply & consumption | 100~240V AC/DC <5W | |
| Protection Class | Panel | IP 54 |
| Housing | — | |
| Mechanical requirements | Screw torque | 0.74n.m~0.9n.m |
| Installation size | Refer to the Dimensions | |
| Installation Mode | Panel mounting | |
| Transpor- tation requirements | Vibration, Stacking | Amplitude:0.75mm Frequency:10~55Hz 1h for each X,Y,Z directions |
| Min Pulse Width | Reset | 1,20ms optional |
| Pause | 1,20ms optional | |
| Output | Passive contactor output | NPN open collector output (to be ordered) |
| Withstand Voltage | Dielectric Strength | 2000V AC 50/60Hz 1 min |
| Insulation | Insulation Resistance | Min. 100MΩ (at500VDC) |
| EMC Anti-interference capability | Static | 3 class |
| Group of Pulses | 4 class each mode±4000VP-P | |
| Lightning surge | 3 class wire to wire±2000V | |
| Frequency Drop | 3 class | |
FAQ
Q1.Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2.What is your terms of payment?
Usually,we accept T/T, irrevocable L/C at sight. For regular orders, Terms of payment 30% deposit, full payment before delivery the goods.
Q3.What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.
Q4.What is your terms of packing?
Under TOKY brand, the standard packing is 1pc item in a colour box or brown inner box, then into standard export carton.
For OEM order, usually 1pc item in a brown inner box, then into standard export carton.
Q5.What is your terms of delivery?
We accept EXW,FOB,CIF,etc. You can choose the one which is the most convenient or cost effective for you.
Q6.How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.
Q7.Do you have any MOQ limit for the order?
Low MOQ, 1pc for sample checking is available.
Q8.Is it OK to print my logo on the product?
Yes, OEM service is available.
Please confirm with our sales team formally before production and confirm the design firstly based on our sample.
Q9.Are you manufacturer or trading company?
We are manufacturer for over 30 years. Welcome to visit our factory at anytime.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier