RFID prelam sheet provides card manufacturers with a durable and convenient solution for the manufacture of finished cards. prelam stands for pre-laminated. This means fusing together single layers under pressure and high temperature in special lamination press machinery after the electronic parts have been embedded into the carrier material and assembled.
Operating Frequency
125 kHz
13.56 MHz
Layout:2*5,3*8,5.5 or others
Layout:2*5,3*8,or 5*5 or others
Low Frequency Chips(125Khz) | ||||||
1.Read only chips:TK4100,EM4200 | ||||||
2.Read and write chips:ATMEL T5577,EM4305,EM4450 | ||||||
3.HITAG® 1,HITAG® 2,HITAG® S256 | ||||||
Remark: HITAG is registered trademarks of NXP B.V. | ||||||
High Frequency Chips(13.56Mhz) | ||||||
Protocol ISO/IEC 14443A | ||||||
1. MIFARE Classic® 1K, MIFARE Classic® EV1 1K, MIFARE Classic® 4K | ||||||
2. MIFARE Plus® 1K, MIFARE Plus® 2K, MIFARE Plus® 4K | ||||||
3. MIFARE® DESFire® 2K, MIFARE® DESFire® 4K, MIFARE® DESFire® 8K | ||||||
4. NTAG® 203 (144 bytes), NTAG 213 (144 bytes), NTAG® 215 (504 bytes), NTAG® 216(888 bytes) | ||||||
5. MIFARE Ultralight® (48 bytes), MIFARE Ultralight® EV1 (48 bytes), MIFARE Ultralight® C(148 bytes) | ||||||
Protocol ISO 15693/ISO 18000-3 | ||||||
1. ICODE® SLIX, ICODE® SLIX-S, ICODE® SLIX-L, ICODE® SLIX 2 | ||||||
Remark: MIFARE and MIFARE Classic are registered trademarks of NXP B.V. and are used under license. MIFARE and MIFARE Plus are registered trademarks of NXP B.V. and are used under license. MIFARE DESFire are registered trademarks of NXP B.V. and are used under license. MIFARE and MIFARE Ultralight are registered trademarks of NXP B.V. and are used under license. NTAG are registered trademarks of NXP B.V. and are used under license. ICODE are registered trademarks of NXP B.V. and are used under license. | ||||||
RFID inlays are composed of an IC and an antenna
Wet inlays are inlays that have an adhesive backing with a clear PET , PET wet inlays are commonly used to make "RFID Labels" where the inlay is placed on the back of the label with the adhesive side away from the label side so that the label has continuous adhesive.
Dry inlays are inlays that are attached to the substrate backing material commonly called the web.
Operating Frequency
13.56 MHz
860-960Mhz
RFID Inlays for RFID Labels
Ultra High Frequency Chips | ||||||
1.Alien Higgs3,Alien Higgs 4,Alien Higgs 5 | ||||||
2.Imping Monza 3,Monza 4,Monza 5,R6 | ||||||
3.NXP UCODE® G2iM,UCODE® G2iL,UCODE® 7,UCODE® 8,UCODE® DNA | ||||||
Remark: UCODE is a registered trademark of NXP B.V. | ||||||
ZDCARD is a professional manufacture since 2000.
Our main products includes:RFID Cards,RFID Tags,RFID Wristbands,Plastic Cards,and so on
We have 30000 square meters manufacture,300 workers.
Products are selling to all over the world,quality very good.
Welcome your visit!
* best 6 color printing service
* Good quality assurance
* heat lamination
* auto control,stable quality
*10 sets chip embedding machines.
*High production ability
*Strict quality checking process.
*All the cards are 100% QC pass through.
Certificates of ZDCARD
ISO9001:2008
ISO14001
ISO18001
Part of our customers:
1.Q:Are you a manufacturer or trading company?
A:ZDCARD is a professional plastic and RFID card ,RFID Tags manufacture since 2000,welcome to visit！
2.Q:What is MOQ ?
A:MOQ for RFID cards and RFID tags is 500pcs per design
3.Q:What shipping method do we send?
A:DHL,Fedex,UPS,and all express courier,or by air,by sea
4.Q:Can your products be customized?
A: Almost all of our products are customized, including the material,size,thickness and printing.
OEM orders are highly welcome.
5.Q:What artwork format do you support?
A:Usually AI,coreldraw,PSD,PDF format are supported,artwork need to be editable.
JPG format supported when it's above 300dpi.
6.Q:What payment method do you support?
A: we accept various payment,telegraphic transfer,paypal,western union,alibaba trade assurance,
L/C at sight(has minimum limit)
7.What payment terms do you use?
A:We accept 100% T/T in advance,or 50% deposit,30% deposit,depend on each order.
