Diamond saw blade wire saw electroplated diamond blade cutting line woodworking band saw blade cutting line hard diamond
Diamond cutting microwire is a new product of our company. It is used as the supporting cutting consumables for manual, single wire and multi wire cutting machines. It can replace the cutting process of light and abrasive. Materials such as intraocular lens, ceramics, quartz glass, monocrystalline silicon, polycrystalline silicon, sapphire and special metals are cut.
Technical parameters:
1. Wire diameter: 0.12 ~ 0.42mm, diameter deviation ≤ 0.01mm
2. Bus material: cutting steel wire
3. Diamond particle size: 5 μ m ~ 60 μ m, which can be designed according to the requirements
4. Tensile strength: 3200 ~ 3400mpa
5. Line length: diamond cutting line can be manufactured according to user's requirements
characteristic:
1. The cutting edge of diamond sand line is small, the rate of chip production is high, and the material is saved.
2. The cutting accuracy can meet the requirements of material cutting accuracy, and the cutting surface is smooth. After cutting, it can be polished directly, which saves the grinding process and time and materials.
3. The cutting speed of diamond sand wire cutting is faster, which greatly increases the work efficiency.
4. There is no edge collapse to cut a variety of hard and brittle materials, and the edge collapse is less than 10 mm, which can reduce the edge or bottom cracking easily caused by inner circle cutting.
5. To reduce environmental pollution, water cutting can reduce the pollution of cutting powder and keep the working environment of materials and equipment clean.