Semi-auto Stencil Printer T1000
Semi-auto Stencil Printer T1000 provides fine X, Y, Z, and θ adjustments for exact stencil-to-board alignment resulting in precise, fine pitch printing of solder paste.
Maximum print area |
(300*400mm) |
Adjusts to various size frames: |
Frame holder accepts any size stencil frame up to (400*500m) |
Adjustable dual squeegee pressure/speed: |
Manual |
Linear squeegee guide: |
Yes |
Squeegee material |
stainless steel(other material can be ordered) |
Adjusting accuracy |
<0.01mm |
Repeat accuracy |
<0.03mm. |
Ideal printing speed |
500pcs/min |
Accessories: |
Thimbles 8 Support shelves 6 Inner hexangular spanners 1 Nuts and bolts 6 |
Work principle: (more details see User Manual)
1, put PCB(Printed circuit board) at the bottom of stencil and fix well;
2, put solder paste on the inside of the stencil, scraper is moved by guide of driving device, solder paste is printed on the PCB through the hole of the stencil.
3, Take out of printed PCB boards and put it into turnover case
Manual Stencil Printer T1000
Manual Stencil Printer T1000 provides fine X, Y, Z, and θ adjustments for exact stencil-to-board alignment resulting in precise, fine pitch printing of solder paste.
Maximum print area |
(300*400mm) |
Adjusts to various size frames: |
Frame holder accepts any size stencil frame up to (400*500m) |
Adjustable dual squeegee pressure/speed: |
Manual |
Linear squeegee guide: |
Yes |
Squeegee material |
stainless steel(other material can be ordered) |
Adjusting accuracy |
<0.01mm |
Repeat accuracy |
<0.03mm. |
Ideal printing speed |
500pcs/min |
High precision linear guide |
|
|
|
3 axes moving platform |
|
|
|
Stencil holder can be adjusted, air handspike support to lift stencil |
|
|
|