Thriden Industrial Co., Ltd TDzir provides super translucent solid zirconia used for full zirconia crowns or copings in the aesthetic zone, It is a fully-contoured dental restoration with no porcelain overlay.These solid zirconia blocks are formed under pressure from nano purity zirconium oxide powder stabilized with yttria, plus additional unique additives for bonding and translucency. Processed by cold isostatic pressing and precise sintering controls, the blocks are guaranteed to have a homogenous density and shrinkage distribution and extremely constant material characteristics.Solid zirconia has quickly become the preferred replacement for full-cast and porcelain to metal restorations in the posterior.
2. Size: DLC coating can mill around 110units;
Diamond coating can mill around 350units;
Germany raw material can mill around 800-1000units;
CRN coating for pmma & wax
Milling bur for metal
System | shaft | Size | Coating |
Roland | 4mm & 6mm | 0.6mm, 1.0mm,2.0mm & 3.0mm | DLC, Diamond coating, CRN coating, metal milling |
VHF | 3mm | 0.6mm, 1.0mm & 2.0mm | DLC, Diamond coating, CRN coating, metal milling |
Wieland | 3mm | 0.6mm, 1.0mm & 2.5mm | DLC, Diamond coating, CRN coating, metal milling |
Imes-icores | 3mm & 6mm | 0.6mm, 1.0mm,2.0mm, 2.5mm & 3.0mm | DLC, Diamond coating, CRN coating, metal milling |
Amann Girrbach | 3mm | 0.6mm, 1.0mm & 2.5mm | DLC, Diamond coating, CRN coating |
Zirkonzahn | 3mm & 6mm | 0.6mm, 1.0mm,2.0mm & 3.0mm | DLC, Diamond coating, CRN coating, metal milling |
Yenadent | 4mm & 6mm | 0.6mm, 1.0mm,2.0mm & 3.0mm | DLC, Diamond coating, CRN coating, metal milling |
Sirona | 3mm | 0.6mm, 1.0mm & 2.5mm | DLC, Diamond coating, CRN coating |
Arum | 6mm | 1.0mm, 2.0mm & 3.0mm | DLC, Diamond coating, metal milling |
3. Certification: CFDA,CE,ISO13485
4.Products supplied: dental zirconia block, CADCAM milling machine, PMMA&Wax&PEEK, milling burs, sintering furnance & heating element & sintering beads, diamond polisher & grinder, articulator, PFM alloy & CADCAM tatanium disk and so on.
Packing Details: 1pcs per box;
Delivery Details : 3-15 days after 100% payment in advance
OEM : We can do OEM with free charge on zirconia block according to yours pictures, and package OEM is charged by supplier's quotation.
Passed the ISO13485quality system authentication and SGS authentication.
Passed the ISO13485quality system authentication and SGS authentication
A: Differences among zirconia ceramics can occur with the level of purity of zirconia; grain size, trace elements and stabilizing compounds; and consistency of formulation. Differences can exist in shrinkage from batch to batch because of differences in the coefficient of thermal expansion (CTE).
Q: Zirconia substructures have high flexural strength, 900-1200 MPa, but what is the flexural strength of the zirconia/porcelain system?
A:Flexural strength is typically performed on a three-point bend specimen and is a function of relative thickness of the zirconia and overlaid ceramic, but it would not exceed the flexural strength of the zirconia.
Q: Does zirconia ceramic degrade in strength intraorally in 5-10 years?
A: Yes, all-ceramic materials degrade in strength over time - some more than others. Zirconia ceramic has an initial flexural strength of over 1200 MPa, so even if it degrades 5-10% or more, it is still significantly stronger than other ceramics.
Q: Is it ok to grind on a zirconia coping without water spray?
A: Water spray is necessary when grinding on a zirconia ceramic coping. The white light or hot spot you see between a diamond and a zirconia ceramic has been measured at 1500 ºC. If the temperature of zirconia ceramic rises above 1000 ºC, a phase change can occur that will induce cracking and surface defects, lowering the strength of the coping.
Q: Is preparation design of a zirconia coping important since the zirconia ceramic is so strong?
A: Preparation design of the zirconia coping is very important. The thickness of unsupported porcelain should not exceed 2 mm. The zirconia coping should be as thick as needed to avoid unsupported porcelain