Defrost Terminator Cutout Thermostat for Electrolux Westinghouse Kelvinator AEG
Defrost Terminator Cutout Thermostat for Electrolux Westinghouse Kelvinator AEG has a unique dual contact, assembly excellent for AC or DC applications. The narrow differential of 10°C deg, or less in a low temperature application makes it an ideal controller for maintaining a constant temperature without a wide temperature swing. This thermostat offers increased sensitivity in a electrically insulated housing.
Features
• Narrow differential
• Dual contacts for extra reliability
• Automatic reset
• Electrically insulated case
• Various terminal and lead wires options
• Standard +/5°C tolerance or optional +/-3°C
• Temperature range -20°C to 150°C
Applications
• Automotive seat heaters
• Water heaters
• Anti freeze sensors
• Medical applications
• Electrical appliance
• Ice makers
• Defrost heaters
• Refrigerator
• Display cases
Product Name | Defrost Terminator Cutout Thermostat for Electrolux Westinghouse Kelvinator AEG |
Use | Temperature control/Overheat protection |
Reset type | Automatic |
Base material | Resist heat resin base |
Electrical Ratings | 15A / 125VAC, 7.5A / 250VAC |
Max. Operating Temperature | 150 C |
Min. Operating Temperature | -20 C |
Tolerance | +/-5 C for open action(Optional +/-3 C or less) |
Protection class | IP68 |
Contact material | Double Solid Silver Contact |
Dielectric Strength | AC 1500V for 1 minute or AC 1800V for 1 second |
InsulationResistance | More than 100MW at DC 500V by Mega Ohm tester |
Resistance Between Terminals | Less than 100mW |
Diameter of bimetal disc | 12.8mm(1/2″) |
Approvals | UL/ TUV/VDE/CQC |
We strictly control our production and maintain quality assurance process as specified in ISO9001 and ISO14001 certificate. All of products are UL, VDE, TUV, CQC certified.
We adopt Six Sigma to eliminate every possible defect that may occur during design and manufacturing process. Our products are inspected at more than 80 point during the entire manufacturing process.
We inspect our completed products 100% to enhance the reliability of our products.
Except the above measures to keep our products with high quality we also do some specific things to make sure our products meet rigid quality standards.
1. All products are 100% quality tested before leaving our factory.
2. All manufacturing facilities are kept remarkably clean. We feel it is prudent to eliminate as many potential quality problems as possible.
3. All thermostats are tested on application special circuits to assure accuracy in the end product.
4.We utilize silver contacts that help reduce internal resistance for critical applications.
The R&D team works closely with our customers to understand their needs and help to create solutions.
The goal of the R&D team is to develop new products to help our customers to meet their market demands, and help them comply with new regulatory requirements, especially in the appliance, HVAC, and automotive markets.
The R&D team provide customer support in a variety of ways during the development proves including prototypes for preliminary evaluation.
Automatic Reset: A thermostat that automatically resets to its pre-trip contact configuration at a factory preset temperature.
Bimetal: Two metals with different rates of expansion molecularly bonded together to form a blade or disc for a thermostat.
Differential: (also known as Hysterisis) Refers to the difference between the opening and closing temperatures of a thermostat.
Maximum Temperature: (TM or Tm) In reference to a thermal cutoff, the maximum temperature to which the device can be subjected for a period of ten minutes without resuming conductivity once it has opened.
Minimum Differential: (also known as deadband) The minimum number of degrees between the actual open and actual close temperatures.
Normally Closed: Contacts open on temperature rise.
Normally Open: Contacts close on temperature rise.
S.P.S.T. (Single Pole/Single Throw): A switch with a single set of terminals and a single set of contacts.
Snap Action Thermostat: A thermostat with a Bimetal element that snaps to close the contacts when the activation condition is experienced. This construction permits the clean break of loads.
Thermal Cutoff: A thermal cutoff is an electrical safety device that interrupts electric current when heated to a specific temperature.
Tolerance: The allowable range above and below a nominal temperature.
Defrost Terminator Cutout Thermostat for Electrolux Westinghouse Kelvinator AEG
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier