Welcome to TradeChina
Danfoss MPV series motor MPV023 MPV025 MPV035 MPV044 MPV046 Danfoss hydraulic piston pump
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Danfoss MPV series motor MPV023 MPV025 MPV035 MPV044 MPV046 Danfoss hydraulic piston pump
Series 40 motors can be applied together or combined with other products in a system to transfer and control hydraulic power.
Series 40 motors utilize parallel axial piston / slipper
design in conjunction with a fixed or tiltable swashplate. There are M25, M35, M44, M46 fixed motor units and M35, M44, M46
variable motor units.
The M35 and M44 variable motors feature a trunnion style swashplate and direct displacement control.
The M46 variable motors utilize a cradle swashplate design and a two-position hydraulic servo control.
The M46 variable motor is available in a cartridge flange version, which is designed to be compatible with CW and CT compact
planetary gearboxes. This combination provides
a short final drive length for applications with space limitations.
Case Presure: Under normal operating conditions, case pressure must not exceed the rated pressure.
Momentary case pressure exceeding this rating is acceptable under cold start conditions, but still must stay below the maximum
pressure rating. The minimum pressure provides proper lubrication at high speeds. Operation with case
pressure in excess of these limits may result in external leakage due to damage to seals, gaskets, and/or housings.
Rated Speed is the speed limit recommended at full power condition and is the highest value at which normal life can be expected.
Maximum Speed is the highest operating speed permitted and cannot be exeeded without reduction in the life of
the product or risking immediat failure and loss of driveline power (which may create a safety hazard).
Series 40 motors utilize parallel axial piston / slipper
design in conjunction with a fixed or tiltable swashplate. There are M25, M35, M44, M46 fixed motor units and M35, M44, M46
variable motor units.
The M35 and M44 variable motors feature a trunnion style swashplate and direct displacement control.
The M46 variable motors utilize a cradle swashplate design and a two-position hydraulic servo control.
The M46 variable motor is available in a cartridge flange version, which is designed to be compatible with CW and CT compact
planetary gearboxes. This combination provides
a short final drive length for applications with space limitations.
Case Presure: Under normal operating conditions, case pressure must not exceed the rated pressure.
Momentary case pressure exceeding this rating is acceptable under cold start conditions, but still must stay below the maximum
pressure rating. The minimum pressure provides proper lubrication at high speeds. Operation with case
pressure in excess of these limits may result in external leakage due to damage to seals, gaskets, and/or housings.
Rated Speed is the speed limit recommended at full power condition and is the highest value at which normal life can be expected.
Maximum Speed is the highest operating speed permitted and cannot be exeeded without reduction in the life of
the product or risking immediat failure and loss of driveline power (which may create a safety hazard).
Charge pump | Hydraulic pump parts | |||
Hydraulic pump | Cylinder block | Press pin | ||
Piston motor | Piston shoe | Snap ring | ||
Piston pump | Retainer plate | Coil spring | ||
Gear pump | Ball guide | Disk spring | ||
Charge pump | Valve plate | Barrel washer | ||
Pilot pump | Shoe plate | Oil seal | ||
Vane pump | Bearing plate | Frication plate | ||
Repair OEM parts | Swash plate | Steel plate | ||
Motor spare parts | Drive shaft | Metal |
1.Be of long standing factory built in 1986
2.USA professional engineer and with 5 utility models and 5 patents
3.GRH OEM and with 370 professional employees, 4 work shops total 22000 square meters
4.208 pcs machanical and test equipments
5.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling,to
ensure the quality of products manufactured
6.become TEREX,JOHN DEERE, HYDAC,AGCO,EATON ,NEW HOLLAND ,GARONER DENVER and MAHINDRA supplier
2.USA professional engineer and with 5 utility models and 5 patents
3.GRH OEM and with 370 professional employees, 4 work shops total 22000 square meters
4.208 pcs machanical and test equipments
5.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling,to
ensure the quality of products manufactured
6.become TEREX,JOHN DEERE, HYDAC,AGCO,EATON ,NEW HOLLAND ,GARONER DENVER and MAHINDRA supplier
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier