Daly 13.8v bms 6s li-ion lifepo4 lto Lithium battery protection board bms 15a 24 v 6s bms li-ion using for solar system
-This Link can support BT and UART communication.If you need other function,please contact with seller before you place order.
-For our smart bms,when first use,need to activate first,then B- P- can be conductive,BMS can work well.
Activation method:
Method 1: Purchase the power board,there is an activation switch on the board and click the button.
Method 2: Charge activation, B-line must be connected to the total negative pole of the battery pack when
charging . 3S~5S, J series (10J, 16J ) BMS only can be activated by this way.
- BMS shipping package includes accessories BT module *1pcs and USB cable 1pcs and balance cable *1pcs and English manual *1pcs,Package also come with B-P- cable,NTC cable(temperature sensor).
-the Android and IOS APP available to download.
-Pls refer to following link to understand blue-tooth set up by APP.
https://www.dalyelec.cn/newsshow.php?cid=24&id=74&lang=1
Main Functions Description:
Over-charging protection: Yes
Over-discharging protection: Yes
Over-current protection:Yes
Temperature protection: Yes
Disconnect protection: Yes
Short Circuit Protection : Yes
Short Circuit protect recover : Yes
Balance Function: Yes
More specific parameter values are in the description picture
Advantages:
1. BMS was be manufactured by high quality Mos and IC imported . Keep your battery long cycle service life time.
2. Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.
3. Extreme low power consumption. The consumption of the whole device is less than 50uA.
1. Overview
4S BMS is used for 4 series 12V battery pack.
We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.
2. Advantage
1)Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.
2)Strong load ability, constant discharge current 200A, use high voltage resistance, low inner
resistance power Mosfet. The heat sink will greatly help cooling.
3)IC itself has power balancing function. The circuit is simple and reliable.
4)Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection
function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.
5)Extreme low power consumption. The consumption of the whole device is less than 50uA.
6)PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating
3.Technical parameter
(The following is an example for 3.2V rated LiFePo4 battery.
|
Content |
Spec |
Unit |
Discharge |
constant discharge current |
80/100/120/200 |
A |
peak discharge current |
200/200/300/400 |
A |
|
Charge |
charge voltage |
14.6 |
V |
charge current |
within 80/100/120/200 |
A |
|
Over charge protection |
over charge volt |
3.6±0.05 |
V |
over charge volt protect delay |
0.5 |
S |
|
Over charge volt release |
3.6±0.05 |
V |
|
Power balancing
|
Power balance volt |
3.6 |
V |
balance release volt |
3.6 |
V |
|
balance current |
35 |
mA |
|
Over discharge protection |
Over discharge detect volt |
2.5±0.05 |
V |
Over discharge detect delay |
0.5 |
S |
|
Over discharge volt release |
3.0±0.05 |
V |
|
Over current protection |
Over current detect volt |
150 |
mV |
Over current detect delay |
9 |
MS |
|
Over current protection |
400A(MAX) |
A |
|
Over current protect release |
disconnect load |
|
|
Short circuit protection |
Short circuit protection |
External load short circuit |
|
Short circuit detect delay |
250 |
uS |
|
Short circuit detect release |
Disconnect load |
|
|
Temperature protection |
Temp protection |
none |
℃ |
resistance |
Main circuit resistor |
≤10 |
mΩ |
Self- consumption |
Working current |
≤40 |
uA |
Sleepy current(when battery is over discharged ) |
≤20 |
uA |
|
Working temp
|
temp range |
-30/+80 |
℃ |