DX5 DX4 DX7 5113 xp600 tx800 print head cleaning machine Ultrasonic print nozzle cleaner

DX5 DX4 DX7 5113 xp600 tx800 print head cleaning machine Ultrasonic print nozzle cleaner

1:Cleaning Fluid Flow Control Knob

2:Ultrasonic Control Switch

3:Flush Control Switch

4:Flush Spare Switch

5:Anti - Pumping Control Switch

6:Anti - Pumping Spare Control Switch

Note:Please clean the remaining ink in the print head and it's surface first prevent the filter from premature plugging.

Open the bottom lid of the machine and the lid of cleaning fluid tank, pour cleaning fluid into the cleaning fluid tank.. The minimum should be over the water outlet port of the tank.

Cover the cleaning fluid tank lid, and then the bottom lid of the machine.

Open the top lid and put on nozzle holder, connect the inlet of print head to the flushing pipe.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine.

Turn the flow control knob to the minimum position. Then open the flush button.

According to the situation of cleaning the nozzle slowly rotate the flow control knob, so as not to rush the nozzle. Anti-pumping operation need put nozzle into the liquid surface 2mm.

Plug the pipeline according to their own needs. Pour cleaning fluid into the cleaning tank ,to close to the water outlet port.

The head nozzle should be immersed in the liquid surface 2mm. Open the ultrasonic cleaning after about 30 seconds , rest 3 minutes and then open 30 seconds. Do not cycle more than 5 times.

Repeated cleaning for several times.and Cleaning the print head again after changing the cleaning fluid . Until the cleaning fluid which jet from the nozzle is neat and clean. Then re-install it on the printer after cleaning up the print head.

Packaging:cartons

Shipment terms:DHL/FEDEX/UPS/TNT and etc.

We'll choose a economical transportation company for you.