DSC No.FS8 DN40 High-performance Cast Steel Ball Float Steam Trap

Cast steel ball float steam trap

 Features:

1.Be famous for high efficiency, energy saving and low cost , high versatility,long work life, Suitable for low pressure main steam pipe and various heat exchanger

2.Equipped with DSC patent resist water hammer and prevent broken watermain non-return valve

3.Inspection hole on top, After open made known  trap is normal or not

4.Drip discharge under low load,medium load in the intermittent discharge,full load with continuous emissions

5.There are different orifice to choose from , maintain a certain displacement under different pressure

6. When operating the entire discharge condensate gas, Back pressure resistance is strong, suitable for recycling system

7. Can be equipped with fittings in accordance with the customer demand and supply of parts

8.Chrome parts adopt stainless steel and hardened seating, wear-resisting corrosion resistanc

9. Small series can be mounted to the distributor, reduce the water hammer shock

10. Parts can be replaced as per to customer

11.Applicable to the front-end control valve or  solenoid valve  in the process

Dsc Cast Steel Float & Thermostatic Steam Traps

Float Unit For Operating Pressure 40kg/Cm2 X 385°C

Good Energy Conservation.

Good Resistance To Wear.

Good Corrosion Resistance.

Do Not Vent Air And Co2 At Steam Temperature.

Excellent Operation Against Back Pressure.

Poor Resistance To Damage From Freezing.

Fair Ability To Purge System.

Immediate Responsiveness To Slugs Of Condensate.

Poor Ability To Handle Dirt.

Large Comparative Physical Size.

Matters needing attention:

1. Big size, not resistant to cold

2. Required for a device level, can't skewed

3. Cannot be used for overheat steam

Material

 No.FS2~FS08   specifications of the specific(mm) MOP(KG/CM²)  Weight(KG)
 

 Two years warranty