Model | DR-45-5 | DR-45-12 | DR-45-24 | |||
OUTPUT | DC Voltage | 5V | 12V | 24V | ||
Rated Current | 9A | 3.75A | 2A | |||
Current Range | 0-9A | 0-3.75A | 0-2A | |||
Rated Power | 45W | 45W | 45W | |||
Ripple & Noise (max.) Note.2 | 80mVp-p | 120mVp-p | 150mVp-p | |||
Voltage Adj. Range | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 21.6 ~ 26.4V | |||
Voltage Tolerance Note.3 | ±2% | ±1% | ±1% | |||
LINE REGULATION | ±1% | ±1% | ±1% | |||
LOAD REGULATION | ±1% | ±1% | ±1% | |||
Setup, Rise Time | 100ms,30ms/230VAC 100ms,30ms/115VAC at full load | |||||
Hold Up Time | 100ms/230VAC 21ms/115VAC at full load | |||||
INPUT | Voltage Range | 85~264VAC 120~370VDC | ||||
FREQUENCY RANGE | 47~63Hz | |||||
AC Current | 0.88A/115V 0.48A/230V | |||||
Efficiency | 72% | 77% | 80% | |||
Inrush Current | COLD START 15A/115VAC 30A/230VAC | |||||
PROTECTION | Over Load | 105%~150% rated output power | ||||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | ||||||
Over Voltage | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 27.6 ~ 32.4V | |||
Protection type : Shut down o/p voltage, re-power on to recover | ||||||
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||||||
ENVIRONMENT | Working Temp., | -10°C~+60°C; (Refer to "Derating Curve") | ||||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||
Storage Temp., Humidity | -20°C~+85°C; 10%~95%RH | |||||
Temp. Coefficient | ±0.03%/°C(0~50°C) | |||||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | |||||
SAFETY | Withstand Voltage | I/P-O/P:3KVAC | ||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH | |||||
EMC EMISSION | Compliance to EN55032, EN55035 Class B, EN61000-3-2,-3 | |||||
DIMENSION | 78*98*56 mm (W*H*D) |
Features: 110V/220V AC to DC Power Series 3V 5V 6V 9V 12V 13.8V 15V 18V 24V 28V 36V 48V | |
Model Series Link (View more) | |