Damp proof course
Description
A damp proof course ( DPC ) waterproof material is a physical barrier inserted into the fabric of a building to stop water passing from one place to another.
Embossed polythene Damp Proof Course waterproof material can be on a horizontal plane, stopping water rising up from the ground by being sucked up by the dry masonry above, or vertically to stop water passing from the outside of a building, though the masonry, to the inside.
DPC's have taken many forms through the ages and one of the earliest forms was to use a layer of slate in the construction. Slate is still used but the less expensive plastic version ( below right ) is now more widely used.
Specification
Thickness: 0.5mm, 0.7mm
Width: 100mm, 150mm, 220mm, 450mm, 600mm
Length: 30m
Usage
The DPC can be used in both vertical and horizontal applications to restrict upward and horizontal moving water within structure walls.
DPC is unsuitable for use in applications that places high sheer stress on the DPC, such as restraining walls or high flexible stress, such as freestanding walls and parapets.
Suitable for use all year round, this DPC is a highly versatile product and is subject to stringent quality controls to meet all British Standards.
Limitation
The DPC should not be used to restrict the flow of downwards moving water such as above lintels or within cavity walls.
Installation
Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
Some brief guidelines on how to use the DPC are supplied below:
- For external walls the DPC should be applied 150mm above the adjoining surface and should be linked with the DPM in solid floors. The DPC should be applied to a fresh bed of mortar, completely free of projections that may puncture the material or impede the DPC from lying flat. When joining two pieces of DPC they should be lapped over each other by at least 100mm.
- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM. The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPC's are joined.
Our company
Shandong Jinding waterproof technology Co. Ltd. is a manufacturer of waterproof materials. PVC waterproof membrane has the characteristics of well-equipped testing facilities and strong technical force. We have 23 years experience in waterproofing, professional and technical person, complete testing equipment, stable and reliable product quality.
Our main products are: polyvinyl chloride (PVC) waterproof membrane, TPO/ EPDM waterproof membrane, self adhesive bitumen waterproof membrane/ flash bond tape, geomembrane etc.
Our service
1.Sample: the sample is free ,you only should pay for the freight.
2. If you order to us ,we must promise the quality ,if some quality problem happened,
(1) We will dispatch our Quality and Problems Appraisers to make a confirmation
(2) Have a negotiation of the compensation and sign agreements
(3) Our After-Sales Department will perform the duties as the agreements.