DN500 PN10/16/150LB Gearbox EPDM Hard Seat Wafer Butterfly Valve for Water
A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.
A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
There are different kinds of butterfly valves, each adapted for different pressures and different usage. The zero offset butterfly valve, which uses the flexibility of rubber, has the lowest pressure rating. The high performance double offset butterfly valve, used in slightly higher-pressure systems, is offset from the centre line of the disc seat and body seal (offset one), and the centre line of the bore (offset two). This creates a cam action during operation to lift the seat out of the seal resulting in less friction than is created in the zero offset design and decreases its tendency to wear. The valve best suited for high-pressure systems is the triple offset butterfly valve. In this valve the disc seat contact axis is offset, which acts to virtually eliminate sliding contact between disc and seat. In the case of triple offset valves the seat is made of metal so that it can be machined such as to achieve a bubble tight shut-off when in contact with the disc.
Technical Specifications
Nomidal Diameter | DN(mm) | 50~2000 | ||
Nominal Pressure | PN(Mpa) | 0.6 | 1 | 1.6 |
Test Pressure | Shell Test | 0.9 | 1.5 | 2.4 |
Sealing Test | 0.66 | 1.1 | 1.76 | |
Air Test | 0.6 | 0.6 | 1.76 | |
Suitable Medium | Air, water, sewage, steam, gas, oil, etc | |||
Actuator | Handle, gear, electric actuator, pneumatic actuator |
Main Parts & Materials
Part Name | Part Name |
Body | Cast iron, ductile iron, cast steel, stainless steel, rubber-lined, PTFE-lined, etc |
Disc | Cast iron, ductile iron, cast steel, stainless steel, special materials |
Seat Ring | Ductile iron, cast steel, stainless steel, alloy steel |
Stem | 45#, 2Gr13, stainless steel |
Packing | O-Ring, soft graphite |
DN500 PN10/16/150LB Gearbox EPDM Hard Seat Wafer Butterfly Valve for Water
About TWS Valves :
Production Facility :
Reliable Quality Assured by ISO 9001 2008
Competitive Price by Strict Cost Control
On-Time Delivery by All- Process Production Plan and Control
" TWS regards quality as an essential and integral part of our business success. To meet this, we have achieved all types of world-known certificates. Manufacturing "TWS" Brand products has evolved as a mark of quality and our products find warm acceptance in domestic as well as international market. "
DN500 PN10/16/150LB Gearbox EPDM Hard Seat Wafer Butterfly Valve for Water
Double flange concentric butterfly valve Rubber seated swing check valve Y strainer Flange balancing valve
Size:dn50~dn2400 Size:DN50~DN300 Size:dn40~dn600 Size:dn50~dn350
Pressure:pn10/pn16 Pressure:pn10/pn16 Pressure:pn10/pn16 Pressure:pn10/pn16
Design:EN593
Flange eccentric butterfly valve Soft seated gate valve duo-plate check valve Air releasing valve
Size:dn100~dn2600 Size:dn50~dn100 Size:dn40~dn800 Size:dn50~dn300
Pressure:pn10/pn16 Pressure:150psi/200psi Pressure:pn10/pn16 pressure:pn10/pn16
Design:EN593 Design:din3352/bs5163 Design:API594