DMX Controller WS2811 DC5V 12V DMX Pixel LED Module Strip light SPI Converter RGB dmx512 Controller decoder

DMX Controller WS2811 DC5V 12V DMX Pixel LED Module Strip light SPI Converter RGB dmx512 Controller decoder

Specifications:

1, 5~40V DC wide voltage power supply
2, support all basic LED driver ICs on the market
3, support a variety of DMX512 control devices, support up to 3072 DMX512 channels;
4, real-time automatic identification of DMX512 signal
5, comes with 45 kinds of pattern effects, dazzling and smart;
6, single offline control or multiple simultaneous cascaded two working modes. Up to 2048 pixels per decoder

7. Appearance size: 77*64*23mm

8. Packing size: 115*80*27mm

9. Net weight: 110g

10. Packing size: 410*310*150mm/100PCS

        Support IC (please note the IC model before ordering): WS2811, WS2812, WS2813, WS2801, SK6812-RGB, SK6812-RGBW, SK6812-WWA, LPD6803, LPD8806, UCS1903, UCS9812, APA102, APA104, TM1803, TM1804, TM1809, TM1812, TM1914, SM16703.DMX512

The function of the port corresponding to the silk screen of the shell:

5~40V   DC power input 5~40V

IC SEL   Controlled drive IC selection

AUTO    Self-contained effect automatic button

SPEED   Self-contained effect speed selection button

MODE     Mode selection button with a pattern effect 

Fourth, the parameters:

  Working voltage: 5~40V DC wide voltage input;

  Power consumption: less than 1W.

Operating instructions

1. External DMX512 control signal:

  Ensure that the power supply is normal and the wiring is correct. Whenever the DMX512 signal is connected, it can be automatically detected and decoded.

  When the decoder is cascaded, the DMX512 signal is decoded synchronously on each decoder and simultaneously displays the same effect on the fixture.

2, running with the pattern effect:

  Pressing the MODE button a single time can cycle through an effect;

  Press the SPEED button during operation to adjust the speed of the pattern effect, and select the desired speed in turn, a total of 6 speeds;

  In any state and speed, press the AUTO button to return to the automatic mode.

3, the dial switch description (subsequent plus more IC support):

  Dial 1 separately: control WS2801; only dial 1 and 2: control UCS1903 and APA104;

Dial 2 separately: control WS2811; only dial 1 and 3: control TM1804 and TM1809;

Dial 3 separately: control LPD6803; only dial 1 and 4: control APA102;

  Dial 4 separately: control LPD8806; only dial 2 and 3: control UCS9812;