Parameters | Min Value | Typical Value | Max Value | Unit |
Power supply | 12 | 24 | 30 | VDC |
Output Current | - | - | 8 | A |
Over voltage protection | - | - | 5 | VDC |
Under voltage protection | - | 20 | - | mA |
Speed Control Range | - | - | 20000 | RPM |
Input analog voltage | - | - | 5 | VDC |
External potentiometrer | 10K | Ω |
CN5Terminal | Single Category | Functional Definition | ||||||||
DC+ | Power connection | Power supply positive electrode(12-30VDC) | ||||||||
DC- | Power supply negative electrode( Hall sensor negative electrode) | |||||||||
W | Motor connection | Motor line W phase | ||||||||
V | Motor line V phase | |||||||||
U | Motor line U phase | |||||||||
GND | Hall Single | BLDC Hall single power negative electrode | ||||||||
HW | Hall senor single HW | |||||||||
HV | Hall senor single HV | |||||||||
HU | Hall senor single HU | |||||||||
VCC | BLDC Hall single power positive electrode | |||||||||
SV | Control single | External speed setting signal input terminal; When connecting external potentiometer, The middle terminal connects SV,the other two terminals connect to VCC and DC- | ||||||||
EN | Motor stop signal port; when EN and COM are disconnected, the motor stops slowly when v connects the motor | |||||||||
F/R | Motor direction control terminal; F/R is disconnected from DC, the motor rotates clockwise, otherwise the motor rotates counterclockwise | |||||||||
BRK | Motor brake stop control signal; BRK and DC- connect in default, when BRK and DC- disconnect, motor brake stops. | |||||||||
Com | Common port(0V) |