Model Name | Capacity Performance |
DMB-90E Series |
Tuner to IP series : max to 24 Tuners to 256*SPTS/4*MPTS Receiver , 6 modules ,each modules 4 tuners
support 2*independent ASI input/output
|
DMB- 24E Series | Tuner to RF series :max to 24 tuners input , 6 modules ,each modules 4 tuners
output:RF DVB-T/DVB-C/ATSC/ISDB-T option from UI
|
DMB-4000 Series |
IP to RF 8*16 DVB-T/ATSC
IP to 16/32 QAM
IP to 8*ISDB-T
|
DMB-9581E Series | Input:max to 24 HDMI input ,6 modules ,each modules 4 HDMI input output: RF DVB-T/ATSC/ISDB-T/DVB-C option from UI |
DMB-8820E Series | input:max 24 HDMI input,6 modules ,each modules 4 HDMI input
Output: IP 24*SPTS/1*MPTS
|
Mixed series | 16*HDMI+4*Tuners to 8*RF out
8*HDMI+4*Tuners to 16*DVB-T out
you can chose HDMI,Tuners,IP input in one device
|
MainFeature
Specifications
Input |
|
QPSK Input |
Input frequency range: 950~2150MHz Input level: -25~-65dBm Symbol rate: 2~45Mbaud Rolling-off factor: 0.35 Convolution encoding rate: 1/2, 2/3, 3/4, 5/6, 7/8 Interleave depth: I=12 Polarization: 0/13V/18V(optional) Connector: F, 75ohm |
QAM Input |
Input frequency range: 47~862MHz Input level: -20~-70dBm Symbol rate: 1~7Mbaud Demodulation: 16/32/64/128/256QAM Connector: F, 75ohm |
COFDM Input |
Input frequency range: 174~230MHz, 470~862MHz Input level: -20~70dBm FFT: 2K/8K Guard interval: 1/4, 1/8, 1/16, 1/32 Demodulation: QPSK, 16QAM, 64QAM Bandwidth: 6/7/8MHz FEC: 1/2, 2/3, 3/4, 5/6, 7/8 Connector: F, 75ohm |
MPEG TS Input |
1*ASI input Comply with EN 50083-9 ASI standard Max. bit rate: 170Mbps Effective bit rate: 1~54Mbps ASI format: Byte or Burst MPEG frame: 188/204 byte Return loss: >10dB Connector: BNC, 75ohm |
8PSK Input(optional) |
Input frequency range: 950MHz~2150MHz Input level: -25dBm~065dBm Symbol rate: 2~45Mbaud FEC: 1/2, 2/3, 3/4, 5/6, 6/7, 7/8 Polarization: 0/13V/18V(optional) Connector: F, 75ohm |
DS3 (optional)
|
Max. input bit rate: 44.736Mbps Format: comply to G.804/G.752(DS3) standard Connector: BNC, 75ohm |
Output |
|
ASI |
2*ASI output, BNC interface; (1*ASI and 1*SDI output optional), BNC interface; |
Video |
1*CVBS, RCA/BNC interface 1*RGB/YUV interface (G/Y) 1*RGB/YUV interface (B/U) 1*RGB/YUV interface (R/Y) |
Audio |
Unbalanced analog output: 1*L/R, RCA interface.(Stereo supported) Balance analog output: 1*XLR, Canon interface. |
IP |
TS over IP input/output (2 independent Ethernet interface) Connector: RJ45, 100Base-T Max. output bit rate: 70Mbps UDP/RTP: support Unicast and Multicast IGMPV2 |
General |
1*DS3 loop output(optional) 1*Tuner loop out |
Decoding |
|
Video |
MPEG-2 SD, 4:2:0 Chroma sampling mode |
Audio |
MPEG-1 Layer II |
GENERAL OPTIONS |
|
Control and Monitoring |
Remote control network, SNMP supported Local control: management via Front panel and LCD |
Physical and Power |
Voltage: 90~260VAC, 50/60Hz Consumption: 40W Operating temperature:-10~50°C Storage temperature: -20~70°C Humidity: 10~90% (non-condensing) Dimensions: 430mm(W)*400mm(D)*45mm(H) Weight: 5Kg |
Overview
DMB-9010 SD Professional IRD optionally supports DVB-S, DVB-C, DVB-T, and DVB-S2 signal outputs. It receives and demodulates various RF signals and outputs DVB standard transparent MPTS. With 2 DVB-CI slots, DMB-9010 also supports various CA systems. Furthermore, embedded with MPEG-2 decoding module, it can decode and output analog AV signals at real time. DMB-9010 supports TS over IP, which can be widely applied to digital TV programs retransmission and IPTV system.